SECO-LARM USA EVT-PC4KQ installation manual Port PCI Power Distributor Card Range See chart on

Page 1

ENFORCER PASSIVE PCI VIDEO BALUN HUB

Installation Manual

Specifications:

EVT-PC4-VT2Q (Video Balun Card)

Range*

B/W: 2,000 feet (610M)

 

Color: 1,300 feet (400M)

Video Format

RS170, NTSC, PAL, SECAM, CCIR

Maximum Input

1vpp

Insertion Loss

< 2dB per pair from DC ~ 5 Mhz

Return Loss

>-15dB from DC ~ 5 Mhz

Frequency Response

DC ~ 5 Mhz

Attenuation

DC ~ 5 Mhz, 1.5 dB max

Common Mode Rejection

60 dB, 15 KHz~5 MHz

Impedance

 

Coax, Male BNC

75 Ohms @ 1 MHz

Terminal Block

100 Ohms @ 1 MHz

Power

No power required

Temperature Range

14o~165oF (-10o~74oC)

Humidity Range

0 ~ 95%

Wire Type

UTP ( 16 - 24 AWG)

Wire Category

CAT2 or better, CAT5 ideal

UTP Connection

Screwless Terminal Blocks

No. of channel

4

*Note: Shorter range may result when baluns are used with DVR.

EVT-PC4P-JTQ (Power Card)

Video Input

Removable terminal block

Power Input

Power jack (2.1mm jack)

Power Output

Removable terminal block

Power Indicator

3-color LED

Voltage output

12VDC (inc. power adapter)

Total Supply Current

4 Amp. (inc. power adaptor)

Temperature Range

14o~165oF (-10o~74oC)

Humidity Range

0 ~ 95%

Wire Type

UTP ( 16 - 24 AWG)

Wire Category

CAT2 or better, CAT5 ideal

ENFORCER®

EVT-PC4-VT2Q

EVT-PC4-VT2Q

4-port PCI Passive Video Balun Hub

 

Range: Up to 2,000’ (610mm)

 

EVT-PC4P-JTQ

 

4-port PCI Power Distributor Card

 

Range: See chart on page 4.

 

EVT-PC4KQ

EVT-PC4P-JTQ

 

4-port PCI Video Balun Hub & Power Card Set (Includes 4 Amp 12VDC Adapter)

WHAT IT IS

The ENFORCER EVT-PC4-VT2Q is a 4-port PCI Video Balun Hub specifically designed for PC based DVR cards . The EVT-PC4-VT2Q is the most practical and cost efficient way of connecting video signals from CCTV cameras to PC based DVR cards via Cat5 cables. It eliminates the need to install individual video baluns on the DVR card side, and is

Minimum Distance Over UTP @ 12VDC*

Current Draw

1 Pair

2 Pair

3 Pair

100mA

100’

200’

300’

300mA

30’

60’

100’

1 Amp

N/A

15’

30’

*Note: Maximum distance depends on voltage, current, ambient temperature, and wire guage. (Maximize distance with 3 UTP pairs.)

WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.

This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship.

The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else.

NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.

Copyright © 2007 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM.

SECO-LARM®U.S.A., Inc.

FILE: D\DTP\MANUAL\MiEVT-PC4_series_07A.pmd

Order Part # 764-027%

16842 Millikan Avenue, Irvine, CA 92606

Website: www.seco-larm.com

 

PITSW1

Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326

E-mail: sales@seco-larm.com

 

 

equipped with a gold plated BNC connector for optimum video performance and a screwless terminal block for convenient and organized wiring installations.

The EVT-PC4P-JTQ is an add-on power card for EVT-PC4-VT2Q. When installed with EVT-PC4-VT2Q it will allow power to be transmitted from the PC side to CCTV camera side over the same UTP cables used by the video signal. It centralizes the power suppy of CCTV cameras.

Installation

Installing the EVT-PC4-VT2Q and EVT-PC4P-JTQ

1.Shut down the computer, disconnect the power and remove the computer cover from its chasis. See Fig. 2.

2.Determine the location of the available card slots at the back panel of the computer, and remove the metal covering of the desired slot.

3.Securely mount the EVT-PC4-VT2Q and/or EVT-PC4P-JTQ in their respective slots with the provided screw at the back panel of the computer. Please note that the EVT-PC4-VT2Q and EVT-PC4P-JTQ boards do not need to be inserted into the PCI (Peripheral Componet Interconnect) slots of the computer motherboard. Then replace the cover of the computer.

NOTE: For convenient wiring it is recommended that the DVR cards, EVT-PC4-VT2Q and EVT-PC4P-JTQ, be installed adjacent to each other as shown on Fig. 2.

EVT-PC4-VT2Q Wiring (see Fig. 3) - Video Balun Card

1.Make sure the maximum distance between the CCTV camera and the DVR card does not exceed 1,950 feet for monochrome or 1,300 feet for color.

2.Run the UTP cable from the DVR card to where it will be connected to the CCTV camera. Follow the CCTV camera’s wiring instructions for information on how to safely run and hide this wire.

NOTE: 1. Individual separate passive video baluns such as SECO-LARM’s EVT-PB1 are required for each camera on the camera side.

2.The video baluns are polarity-sensitive. Take note of the colors of the positive & negative wires of the video signal cables as this will be needed when connecting the other end of the UTP cables at the DVR card side.

3.Use the orange/ orange-white color wire pair of the UTP cable for the video signal. Connect the UTP cables to the passive video baluns on the camera side and plug the video baluns into the BNC connector of the CCTV cameras. The EVT-PC4-VT2Q can accomodate a maximum of 4 cameras.

Image 1
Contents Installation Installing the EVT-PC4-VT2Q and EVT-PC4P-JTQ Port PCI Power Distributor Card Range See chart onEVT-PC4-VT2Q Wiring see Video Balun Card Port PCI Passive Video Balun Hub Range Up to 2,000’ 610mmEVT-PC4-VT2Q EVT-PC4P-JTQ Wiring Power Cord

EVT-PC4P-JTQ, EVT-PC4KQ, EVT-PC4-VT2Q specifications

SECO-LARM USA is a renowned name in the security technology industry, known for its innovative products that cater to a wide range of surveillance and security needs. Among their cutting-edge offerings are the EVT-PC4P-JTQ, EVT-PC4KQ, and EVT-PC4-VT2Q, which are part of their advanced video intercom and surveillance systems.

The EVT-PC4P-JTQ is a versatile 4-channel video intercom system that boasts a stylish and modern design. It supports multiple video outputs, including HDMI and VGA, making it compatible with a variety of display options. One of its primary features is the ability to support clear two-way audio communication, allowing users to converse with visitors or clients from a distance effortlessly. With an intuitive user interface and touchscreen capabilities, the EVT-PC4P-JTQ ensures easy navigation through its various functions.

The EVT-PC4KQ takes things a step further by enhancing video resolution capabilities. This advanced model supports 4K video output, providing crystal-clear imagery that is crucial for identifying visitors and monitoring environments effectively. Additionally, the EVT-PC4KQ is equipped with advanced image processing technologies, including noise reduction and enhanced low-light performance. This enables a consistent video feed in various lighting conditions, ensuring dependable surveillance day and night.

The EVT-PC4-VT2Q is designed for versatility and expanded connectivity options. It features a robust integration capability, allowing users to connect various cameras and sensors seamlessly within a single system. Its modular design means it can be easily scaled to suit different premises, from small businesses to expansive commercial buildings. Featuring remote access through mobile applications, users can monitor and manage their security systems from anywhere, ensuring peace of mind on-the-go.

In terms of security features, all three models come equipped with advanced encryption protocols to protect against unauthorized access. This emphasis on cybersecurity is essential for maintaining the integrity of sensitive video data. Whether you are looking to enhance the security of a retail establishment, office building, or residential property, SECO-LARM's EVT series stands out for its reliability, clarity, and user-centric design.

In summary, the EVT-PC4P-JTQ, EVT-PC4KQ, and EVT-PC4-VT2Q models from SECO-LARM USA embody modern security solutions. With their advanced technologies and robust characteristics, these intercom systems are ideal for those seeking comprehensive surveillance and communication capabilities in a single, streamlined product. Their combination of quality video output, reliable audio communication, and enhanced connectivity makes them an excellent choice for various security applications.