Maintenance, Check the cover | Sylvania SCM2201, SCM2401, SCM1901

Maintenance

To clean your monitor, please refer to the instructions below:

NOTE: To prevent electrical shock, do not open the LCD monitor casing. Leave repair of the monitor to qualified personnel, please see the tech support information in the warranty.

1. Unplug the power

Unplug the LCD monitor from the AC socket before cleaning the monitor.

2. Check the cover

Check to see if the LCD monitor and accessories are damaged, broken, or strained. If so, please consult the warranty card for Tech Support information.

3. Clean

Never spray or pour any liquid directly onto the screen or case.Avoid allowing any water or liquid from entering the LCD monitor or accessories.

4. Cleaner

Use water or non-ammonia/non-alcohol based glass cleaner. Do not use harsh or abrasive cleaners such as ketene (such as acetone), ethanol, toluene, acetic acid, methane, chloride, or other detergents to clean the monitor, these chemicals can damage the LCD monitor.

5. Screen

To clean your LCD monitor screen or case, use water or a mild cleaner, as listed above. Moisten a soft, clean cloth or if possible, use a special screen cleaner sheet or a solution suitable for static electricity application. Using any cleaner other than water or a mild cleaner may damage your monitor and will not be covered under the warranty.

6. Storage of Unit

If the LCD monitor is not in use for a long time, please unplug it and store it in its original box in order to avoid any damage.

7. Disclaimer

Any damage resulting from use of any cleaner that is not mentioned above is not covered under the terms of the warranty on this product.

Cleaning Your Monitor

1.Gently wipe the screen with a clean soft lens brush or a soft clean lint-free cloth. This removes dust and other particles that can scratch the screen.