Perle 5250 Configuration
AS/400 Configuration to support
5250 Workstation Gateway continued...
Set AUTOSTART option to *YESGO TCPADM
Set DISPLAY SIGN ON PANEL to *YES and then press ENTER
Perle 5250 Configuration
4End TCP/IP
5Start TCP/IP
PC Configuration for AS/400
Workstation Gateway access
You can use any type of operating systems supported by a Perle 833/833AS/833IS, which can run a graphical Web Browser. Then do the following:
•Install a browser as Netscape or Explorer on your workstation.
•
•Start the browser and enter the following URL address to start the 5250 to HTML Workstation Gateway: http://hostname:5061/WSG or http://AS/400 IP address:5061/WSG
Where:
http: Defines which protocol to be used.
hostname Identifies the system to be reach. This can be the name of the AS/400 or his IP address.
:5061 Is the default port for the Workstation Gateway server.
WSG Specifies to use the HTML Workstation Gateway function. WSG must be in uppercase.
www.perle.com |