Omega OM-USB-1208FS manual Analog output terminals D/A OUT 0 and D/A OUT, Power terminals

Page 16

OM-USB-1208FS User's Guide

Functional Details

For more information on analog signal connections

For more information on single-ended and differential inputs, refer to the the OMB-DAQ-2416 Series and OM- USB Series General Guide to Signal Connections (available on our web site at www.omega.com/manuals/manualpdf/M4830.pdf).

Analog output terminals (D/A OUT 0 and D/A OUT 1)

You can connect up to two analog output connections to the screw terminal pins 13 and 14 (D/A OUT 0 and D/A OUT 1). Refer to the pinout diagrams on page 13 for the location of these pins.

Each channel can be paced individually at rates up to 10,000 updates per second. Both channels can be paced simultaneously using the same time base at 5000 updates per channel. The 0-4.096 V output range provides a convenient 1 mV per LSB when setting the output voltage levels.

Digital I/O terminals (Port A0 to A7, and Port B0 to B7)

You can connect up to 16 digital I/O lines to the screw terminal containing pins 21 to 40 (Port A0 to Port A7, and Port B0 to Port B7.) Refer to the pinout diagrams on page 13 for the location of these pins. You can configure each digital port for either input or output.

When you configure the digital bits for input, you can use the digital I/O terminals to detect the state of any TTL level input. Refer to the schematic shown in Figure 8. If the switch is set to the +5 V input, Port A0 reads TRUE (1). If you move the switch to GND, Port A0 reads FALSE.

Figure 8. Schematic showing switch detection by digital channel Port A0

For more information on digital signal connections

For more information on digital signal connections and digital I/O techniques, refer to the OMB-DAQ-2416 Series and OM-USB Series General Guide to Signal Connections (available on our web site at www.omega.com/manuals/manualpdf/M4830.pdf).

Power terminals

The PC +5V connection (pin 30) is on the bottom screw terminal of the OM-USB-1208FS. Refer to the pinout diagrams on page 13 for the location of this pin. This terminal draws power from the USB connector. The +5 V screw terminal is a 5 volt output that is supplied by the host computer.

Caution! The +5 V terminal is an output. Do not connect to an external power supply or you may damage the OM-USB-1208FS and possibly the computer.

The maximum total output current that can be drawn from all OM-USB-1208FS connections (power, analog and digital outputs) is 420 mA. This maximum applies to most personal computers and self-powered USB hubs. Bus-powered hubs and notebook computers may limit the maximum available output current to 100 mA.

Just connecting the OM-USB-1208FS to your computer draws 80 mA of current from the USB +5 V supply. Once you start running applications with the OM-USB-1208FS, each DIO bit can draw up to 2.5 mA, and each analog output can draw 15 mA. The maximum amount of +5 V current available for experimental use, over and above that required by the OM-USB-1208FS, is the difference between the total current requirement of the

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Page Table of Contents OM-USB-1208FS Users Guide Where to find more information About this Users GuideWhat you will learn from this user’s guide Conventions in this user’s guideIntroducing the OM-USB-1208FS ChapterOM-USB-1208FS block diagram Software featuresConnecting a OM-USB-1208FS to your computer is easy Installing the OM-USB-1208FS What comes with your OM-USB-1208FS shipment?Unpacking the OM-USB-1208FS HardwareInstalling the software Installing the hardwareBe sure you are using the latest system software If the LED turns offSoftware paced mode Continuous scan modeFunctional Details Theory of operation analog input acquisition modesScrew terminal wiring USB connectorScrew terminal pins Single-ended configuration Main connector and pin outAnalog input terminals CH0 in CH7 Single-ended measurements using differential channels Differential configurationChhi Chlo Power terminals For more information on analog signal connectionsFor more information on digital signal connections Analog output terminals D/A OUT 0 and D/A OUTCalibration terminal Ground terminalsExternal trigger terminal Sync terminalAccuracy Ideal ADC transfer functionADC transfer function with offset error OM-USB-1208FS channel gain queue feature Error band plotConfiguring for synchronous data acquisition Synchronizing multiple unitsSpecifications Analog inputRange Accuracy LSB Analog output Digital input/outputExternal clock input/output External triggerCounter Non-volatile memory PowerMicrocontroller Main connector and pin out Channel differential modeGeneral EnvironmentalChannel single-ended mode

OM-USB-1208FS specifications

The Omega OM-USB-1208FS is a high-performance data acquisition device designed for engineers and technicians who require accurate data logging and analysis in their experiments and applications. This versatile device is equipped with a range of features that make it an ideal choice for various measurement tasks across different industries.

One of the standout features of the OM-USB-1208FS is its ability to support a wide variety of input signals. The device is equipped with 16 analog input channels, which can be used for both voltage and thermocouple inputs, making it suitable for temperature monitoring and other signal measurements. The analog inputs provide a resolution of 16 bits, ensuring precise and reliable readings. Furthermore, it supports sampling rates of up to 100 kS/s, allowing for rapid data acquisition and real-time monitoring.

In addition to its analog capabilities, the OM-USB-1208FS has digital I/O lines that facilitate control and automation tasks. With 8 digital input/output channels, users can easily manage various external devices, sensors, or actuators, enhancing the overall functionality of the data acquisition system. This makes the device suitable for automation projects, as users can trigger actions based on acquired data.

Another distinguishing feature is the built-in USB interface, which offers a straightforward connection to computers without the need for additional power supplies or complex setups. The device is fully compatible with various operating systems, including Windows, making it easy to integrate into existing systems. The included software allows for easy data logging, visualization, and analysis, simplifying the process for users.

The OM-USB-1208FS is designed with durability and reliability in mind. Its compact and rugged construction ensures that it can withstand the rigors of fieldwork and laboratory use. Moreover, the device's comprehensive range of input types and robust performance specifications make it an asset for researchers across diverse fields, including environmental monitoring, manufacturing, and academic research.

In summary, the Omega OM-USB-1208FS is a powerful data acquisition solution that combines a multitude of features and technologies. With its high-resolution analog inputs, digital I/O capabilities, user-friendly USB interface, and reliable construction, it caters to the diverse needs of professionals seeking to capture and analyze data accurately and efficiently. Whether for academic research, industrial applications, or environmental monitoring, the OM-USB-1208FS stands out as a top choice in the data acquisition landscape.
Top Page Image Contents