SPECIFICATIONS 5
INPUT POWER
Input Voltage: | 115 - 240Vac ±10% |
Frequency: | 50/60 Hz |
Current: | 0.400A @ 103Vac |
| 0.190A @ 265Vac |
Overvoltage Protection: | 275 Volt Varistor |
Overcurrent Protection: | Fuse |
Input Wattage: | 26 Watts |
|
|
OUTPUT POWER |
|
Output Voltage: | 24Vdc ±2% @ 850mA (Resistive Load) |
Output Wattage: | 20 Watts* |
*For higher output wattage greater than 20 watts follow the chart on section 7, Figure 6.2.
Ripple: | less than 100 mVrms |
Operating Indicator: | Front Panel LED |
| |
Overload Protection: | Current limiting with automatic short- |
| circuit protection and temperature |
| shutdown accomplished by the switcher. |
Maximum number of |
|
Signal Conditioner | Depends on module used and |
modules powered: | configuration |
11