References
[1]
Overview
The main aim of this document is to specify the settings required for the NetPort to enable it to connect to your OMEGA logger via an Ethernet network.
As the nstaller program knows t he Netport device as ‘Xport’, the term ‘Xport’ may be used inter- changeably in this document.
Prerequisites
Before proceeding with the installation you will require all of the following:-
-NetPort device
-Lantronix Windows ‘Installer’ program version 3.3. Provided on your OMEGALOG® CD and installed to your OMEGALOG® installation directory
-Networked PC that is able to access the network on which you intend to install the NetPort device
-Network connection at where you wish the NetPort device to reside
*NOTE*
In case of any problems connecting to a Logger through a network, please seek assistance from your IT administrator before contacting OMEGA Engineering.
For more detailed information relating to the NetPort device the reader should refer to the Lantronix Device Installer User Guide document [1].
Page 4