3.3.2 Isolated Digital Output Connections
Each of 8 isolated digital output channels comes equipped with a Darling- ton transistor. Every 8 output channels share common collectors and inte- gral suppression diodes for inductive loads. Channels 0 ~ 7 use COM0, and channels 8 ~ 15 use COM1 as a common pin. If an external voltage (5
~40 V) is applied to an isolated output channel (IDO 0 ~ IDO 15) while it is being used as an output channel, the current will flow from the external voltage source to the card. Please take care that the current through each GND pin not exceed 100 mA.
Figure 3.3 shows how to connect an external output load to the card's iso- lated outputs.
Figure 3.3: Isolated Digital Output Connections
15 | Chapter3 |