Omega OMG-USB-SER-4, Four Port RS-232/422/485 to USB Adaptor manual Appendix a Troubleshooting

Page 14

Appendix A – Troubleshooting

Appendix A - Troubleshooting

Serial Utility test software is supplied with the adapter and will be used in the troubleshooting procedures. Using this software and following these simple steps, most common problems can be eliminated without the need to call Technical Support.

1.If your adapter isn’t working, first check to make sure that USB support is enabled in the System BIOS and it is functioning properly in the operating system. This can be done by using either the Windows 98/ME or Windows 2000 Device Manager.

2.Ensure that the software has been installed on the machine so that the necessary files are in place to complete the installation.

3.When the OMG-USB-SER-4is configured properly, the USB Enabled LED

(E)will be lit. This should allow you to use the WinSSD utility and the supplied loopback plug to check communications. The supplied loopback plug connects TD to RD. If you decide to test the Modem Control Signals, a full pin loopback plug will be required. Details on loopback plugs are included on WinSSD. Contact Omega if you need further assistance

4.When testing the OMG-USB-SER-4in loopback mode, you should see the port LED’s flashing as well as seeing echoed data on the screen. The loopback test first transmits a HEX pattern, 55AA, and then a ASCII string of data. If this test passes, then the OMG-USB-SER-4is ready for use in your application.

5.Please note that if the adapter is configured for 2 wire RS-485 with no echo a loopback test is not possible. The receiver in this case will be turned off and the test will fail. If you plan on using this device in two wire mode test the adapter in RS-422 mode first. Then configure the adapter for your application.

OMG-USB-SER-4

Page 10

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User’sGuide Benelux CanadaMexico Czech RepublicContents Figures What’s Included IntroductionOverview System Installation InstallationOperating System Installation OMG-USB-SER-4 Electrical Interface Selection ConfigurationOriginal configuration SW2 Switch Examples SW3Electrical Interface Configuration Technical Description FeaturesConnector Pin Assignments RS-422/485 DB 9 Male RS-232 DB-9 MaleSpecifications Appendix a Troubleshooting Appendix B How To Get Assistance RS-422 Appendix C Electrical InterfaceRS-232 RS-485 Asynchronous Communications Bit Diagram Appendix D Asynchronous CommunicationsCanadian Radio Interference Regulations Appendix E Compliance NoticesFederal Communications Commission Statement EN60950 IEC950 ‘Safety EMC Directive StatementWARRANTY/DISCLAIMER Temperature

Four Port RS-232/422/485 to USB Adaptor, OMG-USB-SER-4 specifications

The Omega OMG-USB-SER-4 is an advanced four-port RS-232/422/485 to USB adapter designed for seamless communication between legacy serial devices and modern computers. This versatile device caters to the growing need for increased connectivity, making it an ideal solution for industrial control, data acquisition, and other applications requiring multiple serial connections.

One of the main features of the OMG-USB-SER-4 is its ability to accommodate various serial communication protocols, including RS-232, RS-422, and RS-485. This flexibility enables users to connect a wide array of devices such as sensors, PLCs, and data loggers without worrying about compatibility issues. Furthermore, the adapter supports full-duplex communication, making it possible to transmit and receive data simultaneously on each port, enhancing overall efficiency.

The OMG-USB-SER-4 is built with robust technology that ensures reliable performance and durability. It supports a data transfer rate of up to 921.6 Kbps, allowing for fast and efficient data handling. Additionally, with its plug-and-play functionality, the device can be easily integrated into existing systems without requiring complex configurations or additional drivers, facilitating a hassle-free installation process.

In terms of characteristics, the OMG-USB-SER-4 features LED indicators for power and activity status, providing users with real-time feedback on the operational state of the device. The unit also includes built-in surge protection, safeguarding connected devices from voltage spikes and electrical noise, which is crucial for maintaining system integrity in industrial settings.

The compact design of the OMG-USB-SER-4 further enhances its appeal, as it allows for easy deployment in space-constrained environments. The device is USB-powered, eliminating the need for an external power supply, making it convenient for mobile or temporary setups.

In conclusion, the Omega OMG-USB-SER-4 four-port RS-232/422/485 to USB adapter combines versatility, speed, and ease of use, making it an excellent choice for professionals looking to bridge the gap between legacy serial devices and modern computing systems. Its robust features, coupled with reliable technology, ensure that it meets the demands of various industrial applications while maintaining user-friendly operation.
Top Page Image Contents