Omnitron Systems Technology 8249-0 installation instructions Description and Inventory, Mounting

iConverter® Wall-Mounting Kit

User Instructions

Description and Inventory

The 8249-0 iConverter Wall-Mounting kit was designed to attach one iConverter 1-Module or 2- Module chassis to a wall, backboard or other flat surface. The 8249-0 kit should include the following hardware:

(2)“L” shaped brackets

(4)Flat head screws, 4-40, 1/4 inch

(4)Wall mounting screws

Warning:

Before installing an iConverter chassis, make sure to remove it from its power adapter. Make sure to disconnect the power adapter from the AC line power.

Mounting:

1.Align the screw threads of the iConverter chassis with the holes in the bracket.

2.Attach one “L” bracket on each side of the unit using the 4-40 flat head screws enclosed with the kit.

3.The iConverter with the tab brackets should look like the picture below (Fig. 1).

4.Attach unit to the desired surface using the appropriate screws.

5.Follow any installation instructions in the iConverter

User Manual.

Wall Mounting Bracket

Fig. 1 1-Module Chassis with

Wall Mounting Kit

Technical Support:

For help with this product, contact our Tech. Support:

Phone: (949) 250-6510

Fax: (949) 250-6514

Address: Omnitron Systems

040-08249-001C 12/03