Specifications, Technical Support | Omnitron Systems Technology 400

(949) 250-6510

(949) 250-6514

Omnitron Systems Technology, Inc. 27 Mauchly #201

Irvine, CA 92618, USA support@omnitron-systems.comwww.omnitron-systems.com

SAFETY CONSIDERATIONS

Warning

The instructions in this User’s Manual are for use by qualified personnel only. To avoid electrical shock, do not perform any servicing of this unit or its accessories (such as power units) other than that contained in the operating instructions, unless you are qualified and certified to do so by Omnitron Systems Technology, Inc.

Caution

All user-required operations can be performed without ever opening the unit’s cover. Never attempt to open or remove the unit’s cover or tamper with its power units (other than plugging and unplugging them as specified in the operating instructions).

Line Voltage

Before Connecting the Power units to the line voltage, make sure that the voltage of the power source (wall outlet) matches the voltage specified on the power units.

Warranty

This OST product is warranted to the original purchaser against defects in material and workmanship for a period of TWO YEARS from the date of shipment. This warranty period may be extended to LIFETIME by the original purchaser if the product is REGISTERED with OST within 90 days from the date of shipment. TO REGISTER, PLEASE COMPLETE AND MAIL OR FAX BACK THE REGISTRATION CARD. During the warranty period, OST will, at its option, repair or replace a product which is proven to be defective.

For warranty service/repair, the product must be sent to an OST designated repair facility, shipment prepaid by the Buyer. OST will pay postage/shipping charges to return the product to Buyer (using OST’s standard shipping method).

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate use and/ or maintenance of the equipment by Buyer, Buyer-supplied equipment, Buyer-supplied interfacing, unauthorized modifications or tampering with equipment (including removal of equipment cover by personnel not specifically authorized and certified by OST), misuse, operating outside the environmental specification of the product (including but not limited to voltage, ambient temperature, radiation, unusual dust, etc.), or improper site preparation or maintenance.

No other warranty is expressed or implied. OST specifically disclaims the implied warranties of merchantability and fitness for any particular purpose.

Exclusive Remedies

The remedies provided herein are the Buyer’s sole and exclusive remedies. OST shall not be liable for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort, or any legal theory.

Form:040-02651-001 07/00

Omnitron Systems Technology, Inc.

SPECIFICATIONS

n	Protocol:	IBM 5250 and 5250 Express for systems AS/400 and 3X
n	Devices Supported:	All twinax/IBM compatible devices (terminals and
		printers)

nInterface:

Link:	One (1) Twinax, One (1) Fiber or
	One (1) Rj11/45, One (1) Fiber
Port:	One (1) Twinax or
	One (1) Rj11/45
	(RJ11 pins 3-4, RJ45 pins 4-5 are standard)

nCable Types:

Twinax:	IBM 7362229 or equivalent
UTP:	Category 3 (EIA/TIA 568) or higher
	(shorter distance @ lower grade)

nData Rate:

Standard 5250:	1 Mbps -2%, +4%
5250 Express:	1 or 2 Mbps -2%, +4%

nSupported Distances: Host/Device to Mux:

	Twinax:	5,000 ft.
	UTP:	3,000 ft.
	Multimode fiber:	15,000 ft.
	Single-mode fiber:	30,000 ft.
n	Physical Dimensions:
	Rackmount:	W:19.0”xD:6.0”xH:1.75”
	Tabletop:	W:17.5”xD:6.0”xH:1.75”
n	Weight:	7 lbs.
n	Power:	115 or 230 VAC, 100/50 mA

nTemperature:

Operating:	0° to 40°C
Storage:	-40° to 75°C
Humidity:	Up to 90% (non-condensing)

TECHNICAL SUPPORT

For assistance in installing this product, contact Omnitron’s Technical Support Department.

Phone:

Fax:

Address:

Email:

URL: