Clarion DRX9675z VSE effect ON/OFF, Editing/storing a VSE menu User memory, Selecting a P.EQ menu

AC PROCESSOR Operations

AC PROCESSOR Operations

Editing/storing a DSF menu (User memory)

1.	Select a DSF menu which you want to edit on
	the basis of.
2.	Press ENT button $.
3.	Press the right SEARCH button 4 to select
	the EFFECT to be adjusted.
	EFFECT: Adjusts the percentage of reflected
	sound.

Button Sound Equalizer			Frequency
			Characteristic
1	FLAT	Flat sound
2	BASS BOOST Bass is boosted
3	HIGH BOOST High tone is boosted

7. Press and hold one of Direct buttons " for 2	8. Press MODE button & four times or press
seconds or longer to store the edited contents.	and hold ENT button $ for 1 second or longer
∗ You can give a title to the user memory. For	to return to the previous mode.
the inputting method of titles, refer to the
section “Entering titles” in “Operations
common to each mode”.

Professional mode/P.EQ operations

4.	Press the right side of SEARCH button 4 to
	move the cursor.
5.	Press VOLUME buttons 2 up (w) or down
	(z) to make the adjustment (0%~100%).
6.	Press ENT button $.
7.	Press one of the Direct buttons " to store
	the edited contents.
8.	Press MODE button & four times or press
	and hold ENT button $ for 1 second or longer
	to return to the previous mode.

Professional mode/VSE operations

Note:

•The adjustment made in professional mode is not reflected in the adjustment in standard mode. On the contrary, the adjustment made in standard mode is not reflected in the adjustment in professional mode.

VSE effect ON/OFF

∗The factory default setting is “ON”.

4	IMPACT	Low and high tones
		are boosted
5	ACOUSTICAL	Middle tone is boosted
		Gradually attenuated
6
	SMOOTH	from low frequency
		through high frequency

∗To select the user memory, press BAND button 8 to select “VSE User” and then press oen of Direct buttons ".

4.Press MODE button & four times or press and hold ENT button $ for 1 second or longer to return to the previous mode.

Editing/storing a VSE menu (User memory)

1.Select a VSE menu which you want to edit on the basis of.

2.Press ENT button $.

3.Press VOLUME buttons 2 up (w) or down (z) to select the item to be adjusted.

There are DIFFUSE, CAR WIDTH and CAR

P.EQ effect ON/OFF

∗The factory default setting is “ON”.

1.Press MODE button & two times to select “P.EQ”.

2.Press the Shift button !. While the “ON” is lit in the display, the P.EQ effect is set to “ON”.

3.Press MODE button & three times or press and hold ENT button $ for 1 second or longer to return to the previous mode.

Note:

•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ operations” is not reflected in the music source.

Selecting a P.EQ menu

1.Press MODE button & two times to select “P.EQ”.

2.Press BAND button 8 to select “P.EQ Basic”.

3.Press one of the Direct buttons " and select the desired P.EQ menu.

• The settings of the basic P.EQ menus are as follows:

•The different car types and the speaker in-

stallation positions are as follows:

1) SEDAN-1 front: 2WAY

rear: Rear parcel

2)SEDAN-2 front: FULL rear: Rear door

3)WAGON-1 front: 2WAY

rear: Beside the luggage

4) WAGON-2 front: FULL rear: Rear door

5) MINI VAN-1 front: 2WAY

rear: Beside the luggage

6) MINI VAN-2 front: FULL

rear: Equivalent to rear door

∗To select the user memory, press BAND button 8 to select “P.EQ User” and then press one of Direct buttons ".

4.Press MODE button & three times or press and hold ENT button $ for 1 second or longer to return to the previous mode.

1.Press MODE button & and select “VSE”.

2.Press the Shift button !. While the “ON” is lit in the display, the VSE effect is set to “ON”.

3.Press MODE button & four times or press and hold ENT button $ for 1 second or longer to return to the previous mode.

Note:

•If the VSE effect is set to OFF, the adjustment made in “VSE operations” is not reflected in the music source.

Selecting a VSE menu

1.Press MODE button & to select “VSE”.

2.Press BAND button 8 to select “VSE Basic”.

3.Press one of Direct buttons " and select the desired VSE menu.

LENGTH available for the items to be adjusted.

•The VSE adjustment contents are as follows:

DIFFUSE

Compensates for spacial impression.

CAR WIDTH

Compensates for the width of the car’s interior (lateral direction).

CAR LENGTH

Compensates for the length of the car’s interior (longitudinal direction).

4.Press the right side of SEARCH button 4 to move the cursor.

5.Press VOLUME buttons 2 up (w) or down (z) to make the adjustment. The adjustment range is to 1 to 10 for each item.

6.Repeat steps 3 to 5 to complete the adjustment and press ENT button $.

Vehicle type		Parametric Equalizer Parameter
	Channel	BAND 1	BAND 2	BAND 3
SEDAN-1	Front	250Hz/F, 3/Q, -8dB/G	2kHz/F, 1/Q, -4dB/G	5kHz/F, 1/Q, -4dB/G
	Rear	250Hz/F, 3/Q, -10dB/G	1.25kHz/F, 5/Q, 0dB/G	8kHz/F, 5/Q, 0dB/G
SEDAN-2	Front	250Hz/F, 7/Q, -10dB/G	800Hz/F, 3/Q, -4dB/G	8kHz/F, 1/Q, -5dB/G
	Rear	80Hz/F, 7/Q, +3dB/G	125Hz/F, 5/Q, -12dB/G	1.25kHz/F, 5/Q, 0dB/G
WAGON-1	Front	250Hz/F, 3/Q, -8dB/G	1kHz/F, 3/Q, -8dB/G	10kHz/F, 1/Q, -6dB/G
	Rear	250Hz/F, 3/Q, -8dB/G	800Hz/F, 1/Q, -8dB/G	8kHz/F, 5/Q, 0dB/G
WAGON-2	Front	250Hz/F, 7/Q, -8dB/G	400Hz/F, 7/Q, -10dB/G	1.25kHz/F, 7/Q, -8dB/G
	Rear	125Hz/F, 3/Q, -8dB/G	500Hz/F, 5/Q, -5dB/G	1.6kHz/F, 3/Q, 0dB/G
MINI VAN-1	Front	125Hz/F, 5/Q, -4dB/G	1.25kHz/F, 3/Q, -4dB/G	2kHz/F, 7/Q, +3dB/G
	Rear	250Hz/F, 1/Q, -6dB/G	630Hz/F, 3/Q, -4dB/G	8kHz/F, 5/Q, 0dB/G
MINI VAN-2	Front	250Hz/F, 3/Q, -4dB/G	1.25kHz/F, 3/Q, -8dB/G	80Hz/F, 3/Q, +3dB/G
	Rear	250Hz/F, 3/Q, -8dB/G	500Hz/F, 5/Q, -5dB/G	8kHz/F, 5/Q, 0dB/G

F; Center frequency (Hz), Q; Q curve, G; Gain(dB)

26 DRX9675z DRX9675z 27