Ratoc Systems PCIU2 user manual Setting up, Installing the PCI board

Page 5

3. Setting up

3-1. Installing the PCI board

Turn off your computer and install the PCIU2 into a PCI slot.

Please note the following:

1.You have to install the PCIU2 firmly. If the PCIU2 isn’t installed firmly, this product or your PC may get damaged.

2.Be sure the gold contact of the PCI board is completely in a white PCI slot. 3.Be sure to fasten the bracket of the PCI board with a screw as shown below.

After installing it, start your PC. Then, you need to install the driver for the PCIU2.

A)When you use Windows 98SE-----------

Proceed to Chapter 3-2.

B)When you use Windows 2000------------

Proceed to Chapter 3-3.

C)When you use Windows Me--------------

Proceed to Chapter 3-4.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PCIU2 Contents Introduction FeaturesRestrictions Required Operating SystemsPackage Before installingUsing Low-Profile Bracket Installing the PCI board Setting upInstalling the driverWindows 98SE Click Next Then, the following hardware wizard will appear Click Finish Page Installing the driverWindows Select Specify a location and click Next Page Installing the driverWindows Me Page Software Update and Support How to RegisterOptions PCIU2 IIEuropean Union Compliance Statement
Top Page Image Contents