Omnitron Systems Technology 8481-4 Model Type 4Tx VT Protocols, UTP Connectors, Controls

The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper to fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.

Management is accomplished by using a Network Management Module (NMM) or a media converter with integrated management (such as an iConverter 10/100M2) that provides monitoring, remote configuration and trap notification. The management module can be accessed via SNMP, Telnet and via a serial port. The SNMP-based management is accomplished via Omnitron’s intuitive, graphic-oriented NetOutlook management software or third party SNMP management software. Management via the Telnet and the serial interfaces have an easy-to-use, menu-driven interface.

Some of the real-time 4Tx VT parameters that can be monitored include link and data receive status. Other parameters include module type and model, hardware and software revisions, serial numbers and a user-defined identifier.

The user can override the 4Tx VT module’s physical switch settings by using SNMP or Telnet to remotely configure switch- selectable parameters such as auto-negotiation, Half or Full-Duplex, and Backplane Selection.

In addition to all standard iConverter SNMP traps such as module insertion and removal, the 4Tx VT modules can generate traps on port state changes including link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network administrator.

Model Type	4Tx VT
Protocols	10BASE-T, 100BASE-TX
UTP Connectors	RJ-45
Controls	BP Enable, Auto/Man,
	10/100, FDX/HDX
LED Displays	Power, 10/100 UTP Link
Dimensions	W:0.85" x D:4.5" x H:2.8"
Weight	8 oz.
Compliance	UL, CE, FCC Class A
Power Requirement	0.7A @ 3.3VDC (typical)
Temperature	Standard:	0 to 50º C
	Wide:	-40 to 60º C
	Storage:	-40 to 80º C
Humidity	5 to 95% (non-condensing)
Altitude	-100m to 4000m
MTBF (hrs)	740,000

Model Type	Connectors	Distance
8481-4	RJ-45 x 4	100m

For wide temperature (-40 to 60º C) modules, add a "W" to the end of the model number. Consult factory for other configurations and extended temperature (-40 to +75º C) modules.

Trademarks are owned by their respective companies. iConverter is a registered trademark of Omnitron Systems Technology, Inc. NetOutlook is a trademark of Omnitron Systems Technology, Inc. Specifications subject to change without notice.

©2003-2007 Omnitron Systems Technology, Inc. All rights reserved.

091-18481-001B 9/07

800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. • Irvine, CA 92618