Clarion XD516 owner manual Radio Mode Operations

•Z-ENHANCER 3: bass and treble emphasized

•Z-EHCR OFF: no sound effect

Loudness Effect

In order to turn on/off the loudness effect, use the LD button 2 for 1 second or longer. Every time the LD button 2 is pressed and held for 1 second or longer, the loudness effect switches on and off.

*When the loudness effect is on, the display will show “LD”.

Switching the Display

Every time the DISP button 5 is pressed, the display will change between the main display and the clock display.

Main display

Clock display

Main display ...

Setting the Clock

1)Press the DISP button 5 to display the clock display.

2)Press and hold the DISP button 5 for 1 sec- ond or longer.

3)Press the SRCH Left button @, then set the current hour.

4)Press the SRCH Right button @, then set the current minute.

5)Press the DISP button 5, then the clock is set.

Notes:

•If you select another operation mode while you are setting the clock, the clock setting operation will be canceled.

•If you remove the vehicle’s battery for a check or repair, the clock will be reset, so you must set it again.

Radio Mode Operations

FM Reception

For enhanced FM performance the ® tuner includes signal actuated stereo control and Multipath noise reduction circuits.

Listening to the Radio

1)Press the FNC button 3 to select the radio mode, then the radio will be on.

2)To select a preset band, press the BND but- ton !, then select one of the preset bands

such as FM1, FM2, FM3, or AM. Every time the BND button ! is pressed, the display will change as:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1

3)Press the SRCH Left/Right button @, then the station at which there is a broadcast will be selected (Seek selection).

Mute

Use this function to turn off the sound immedi- ately.

Press the MUTE button $. The sound turns off and “MUTE” appears on the display. Press the MUTE button again to cancel the mute mode.

Manual Tuning

1)Press the BND button !, then select FM1, FM2, FM3 or AM.

2)Press and hold the BND button ! for 2 sec- onds or longer, then the display will show “MANU”, which means that a manual selec- tion function is on.

3)Press the SRCH Left/Right button @ and select the right station.

Seek Tuning

1)Press the BND button !, then select FM1, FM2, FM3 or AM.

2)If the “MANU” on the display is on, press and hold the BND button ! for 1 second or longer. When the “MANU” display is off, the Seek Selection function is on.

3)Press the SRCH Left/Right button @, then when it selects the station in which there is a broadcast, it automatically stops.

XD516 11