Installation and Operation

The LV-1200Series Liquid Level Switch is for side-mountingONLY. It is supplied with a 1 l/4” x 1” bushing (No@, Model LV-1201; PVC, Model LV-1202, and Ryton R-4 for Model LV-1203) threaded in place with 2 to 3 wraps of Teflon tape, which must be intact or renewed if the bushing and switch are separated before assembly in tank. Care must be exercised

when threading the bushing into plastic or metal fittings. APPLY a minimum of 2 to a maximum of 3 wraps of Teflon tape to the threads of the bushing. This is especially important if the unit is to be used in metal

fittings where coarse metal threads could gall plastic if not lubricated. The plastic bushing CAN BE CRACKED if the main body of the level switch is tightened into it FIRST. Cracking will not occur if the bushing is FIRST tightened into the pipe or tank fitting and THEN the LV-1200 body is

tightened into the bushing.

Therefore:

5teP 1. Teflon tape thread and tighten plastic bushing into pipe or tank fitting.

3teP 2. Teflon tape thread and tighten the LV-1200 Switch into plastic bushing by applying wrench to hexagon section. Repeat Steps 1 and 2 until the arrow on the body points UPWARD and the threads are leak tight.

NOTE

Plumber ’s tools such as pipe wrenches are not recommended. If possible, use a ‘Rigid ’type wrench where the smooth jaws closely fit the hexagon section.

ELECTRICAL WIRING

Remove the gland nut, grommet and switch cover.

Strip the outer jacket of the electrical cord back approximately 1% I’. Strip the insulation from the individual conductors back approximately % “.

Slip on terminals are supplied with each switch. Remove them from the switch terminals and crimp on or solder to the electrical leads.

Feed the electrical cable through the gland nut, grommet and switch cover as shown below.

Apply slip on terminals to appropriate contacts of the microswitch.

Slide the cover down the cable and fasten it to the body of the switch with the 4 screws provided.

Slide the grommet down the cable until the outer jacket is level with the small end of the grommet and then push the grommet into the tapered end of the cover.

Hold the cable jacket to prevent rotation and thread the gland nut firmly onto the cover.

LV-1203, LV-1202, LV-1201 specifications

The Omega Vehicle Security LV-1201, LV-1202, and LV-1203 are advanced vehicle security systems designed to provide robust protection for automobiles against theft and unauthorized access. These models combine state-of-the-art technology with user-friendly features to ensure the utmost safety for vehicle owners.

One of the standout features of the Omega LV-1200 series is its comprehensive alarm system. The alarms are designed to emit loud sounds that deter thieves while alerting the vehicle owner and nearby individuals. The LV-1201 model includes a basic alarm feature, delivering a straightforward yet effective security solution. In contrast, the LV-1202 and LV-1203 elevate the security standard with advanced motion sensors and glass-break detectors, ensuring heightened vigilance against potential intrusions.

All three models utilize modern immobilizer technologies, which prevent the vehicle from starting if an unauthorized key is detected. This electronic ignition cut-off significantly reduces the chances of vehicle theft. Furthermore, the LV-1202 and LV-1203 come equipped with GPS tracking capabilities. This allows owners to track their vehicles in real-time through a mobile application, making them ideal for those living in urban areas with high theft rates.

The user interface is designed with simplicity in mind. Each system features a remote control that allows owners to lock/unlock their vehicles from a distance, while also enabling quick access to emergency features. The LV-1203 model takes convenience a step further by incorporating a smartphone app, granting users complete control over their vehicle’s security settings remotely.

In terms of installation, the Omega vehicle security systems are compatible with most vehicles and can be integrated seamlessly without any modifications to the existing wiring. This ensures that users can enjoy enhanced security without compromising the original integrity of their vehicles.

Durability is another key characteristic of the Omega LV-1200 series. These systems are built to withstand extreme weather conditions, ensuring consistent performance regardless of environmental factors. This robustness makes them suitable for a wide array of vehicles, from sedans to SUVs.

In conclusion, the Omega Vehicle Security LV-1201, LV-1202, and LV-1203 series are excellent choices for those looking to enhance their vehicle's protection. With their advanced alarm systems, immobilizer features, and real-time tracking capabilities, these models cater to varying levels of security needs while ensuring ease of use and reliability. Vehicle owners can rest assured knowing that they have made a proactive investment in their vehicle's safety.