Timer Switches

READ AND SAVE THESE INSTALLATION INSTRUCTIONS!

Do not supply house power until installation is complete.

All wiring must comply with local electrical codes and the switch must be properly grounded.

Timer w/Single Rocker Switch

TO NUTONE UNIT

WHITE (NEUTRAL)

BLACK (HOT)

GROUND

GREEN GROUND SCREW

WHITE (NEUTRAL)

BLACK (HOT)

EARTH GROUND (GREEN)

QUICKWIRE CONNECTIONS

FIGURE 1

Timer w/Double Rocker Switch

TO NUTONE UNIT

WHITE (NEUTRAL)

BLACK (HOT)

GROUND

WHITE (NEUTRAL)

BLACK (HOT)

EARTH GROUND (GREEN)

QUICKWIRE CONNECTIONS

FIGURE 2

MODELS: VS-66WH, VS-67WH,

VS-68WH & VS-69WH

1.The timer assembly is designed to mount in a 2-1/2" deep double gang box.

2.Run house power wiring (with ground) from fuse or circuit breaker box and wiring from ventilation fan (refer to Fan motor plate for wiring instructions to motor) to timer and switch in outlet box and make connections as illustrated in Figure 1.

3.Strip wires approximately 1/2" to make connections. Connect wire to terminal screws in the timer side. NOTE: Use LINE-1/LOAD-1 for standard operation.

LINE-2/LOAD-2 will turn the current on at the end of timing period.

4.Insert wired switch in wall box with screws provided.

5.Insert wired timer into wall box with “TOP” (indicated on front cover) in proper position. Refer to Figure 2.

6.Fasten timer to wall box using (2) screws provided.

7.Fasten wall plate to timer using (4) screws provided with the plate. The screws must be self-tapped into the timer body and will require a gentle inward pressure while firmly turning the screw.

8.Position small plastic timer dial so that “OFF” is in the up position. Install hex nut and tighten.

9.Push knob on shaft with the tail facing down.

Timer Operating Instructions:

1.Turn knob clockwise (to the right) to desired time period. Timer will automatically turn “OFF” at the end of period.

2.Regardless of time period desired, knob must be first rotated past “TURN PAST” as indicated on timer dial. It may then be turned back to a shorter period if desired.

Timer w/Single Rocker Switch

TOP

“OFF”

POSITION

FIGURE 3

VS-66WH, VS-68WH, VS-67WH, VS-69WH specifications

The NuTone VS series includes a selection of high-quality in-wall speakers, including the VS-66WH, VS-69WH, VS-67WH, and VS-68WH models. Each of these speakers is designed to deliver exceptional sound quality combined with an aesthetically pleasing design, making them suitable for various audio applications in both residential and commercial settings.

The NuTone VS-66WH is a well-rounded model featuring a 6.5-inch polypropylene woofer and a 1-inch soft dome tweeter. This configuration allows it to reproduce a broad frequency range, resulting in rich bass and clear highs. The speaker is designed for easy installation, with a quick-mount system that enables flush mounting into the wall.

Moving on to the VS-69WH, this model takes it a step further with an enhanced driver configuration that includes dual 6.5-inch woofers and a 1-inch tweeter. This design provides increased power handling and delivers a fuller sound experience, making it ideal for larger spaces where more volume and clarity are desired. The VS-69WH also features a sophisticated crossover network to ensure seamless transition across frequencies.

The VS-67WH combines performance and versatility. It features a single 6.5-inch woofer and a 1-inch tweeter, similar to the VS-66WH, but this model comes equipped with NuTone’s innovative speaker EQ technology. This feature allows users to customize the sound output to better suit their listening environment, enhancing the overall audio experience. The sleek grille design also allows for painting to match home décor.

Lastly, the VS-68WH stands out with its powerful dual 8-inch woofers for deep bass and rich soundscapes, making it perfect for home theaters or multi-room audio setups. This model also includes a premium crossover for improved frequency response. The flush-mount design and paintable grille maintain the aesthetic appeal while delivering high-performance audio.

All four models feature robust construction and are designed to fit seamlessly into wall cavities. NuTone's commitment to quality ensures reliability and durability over time. Additionally, they incorporate technologies that facilitate easy wiring, providing flexibility for users to set up a sound system that meets their specific needs. With their different capabilities and specifications, the NuTone VS series offers options for anyone looking to enhance their audio experience in any setting.