Niles Audio SAS-1 manual Installation, Programming

Page 5

The 12Volts DC is present at the other two terminals whenever the switching section of the SAS-1 is activated. Depending on the setting of the Delay Control, the voltage turns off anywhere between ¼ of a second to 30 seconds after the signal that triggered the SAS-1 is removed. This feature is provided as an interface when using the SAS-1 to control other Niles switching devices such as the AVS-2, SPK-1 and AC-3. refer to the section titled “System Expansion” for more details.

INSTALLATION

The SAS-1 should be installed near the equipment or sources you are going to control. An unswitched AC outlet is required for the wall mount AC transformer that powers the unit. The SAS-1 can be tucked away behind the equipment or attached to the mounting surface using supplied hardware.

CONNECTIONS

Refer to Figure 1 on the following page for hookup diagram.

PROGRAMMING

Once the line-level or speaker-level sources have been connected, the SAS-1 must be programmed for the source(s)) you are going to use as a trigger for the switch.

AUDIO ACTIVATED MODE – SPEAKER AND/OR LINE-LEVEL

If you want the SAS-1 to activate when ever a speaker-level signal is present at the “B” input, locate the DIP switch on the front panel and move the slide switch underneath the letter “S” up. Use a small screwdriver or paper clip to move the switch.

If you want the SAS-1 to activate whenever a line-level audio signal is present “B,” move the slide switch underneath the letter “A” up.

NOTE: IF YOU ARE USING SAS-1 TO SIMULTANEOUSLY SWITCH BOTH LINE-LEVEL AND SPEAKER- LEVEL SIGNALS AND WANT THE UNIT TO TRIGGER FROM EITHER SOURCE, MOVE BOTH THE “A” SWITCH AND THE “S” SWITCH UP.

VIDEO-ACTIVATED MODE

If you want the SAS-1 to activate whenever a video signal is present at “B,” move the slide switch labeled “V” up.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI

 

3

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents SAS-1 Congratulations Table of ContentsIntroduction FeaturesOperation Programming InstallationInstallation Examples Using the SAS-1 SAS-1 AVS-2 Adjusting the SAS-1 System Expansion Using the Control OUTSpecifications Page Page Limited Warranty Yes Warranty Registration CardL e s a u d i o C o r p o r a t i o n

SAS-1 specifications

The Niles Audio SAS-1 is a sophisticated product designed for those who seek optimal audio performance in their home theater or multi-room systems. This versatile amplifier excels in delivering impressive sound quality and the features necessary for a modern audio setup.

One of the standout features of the SAS-1 is its powerful 70 watts per channel output. This ensures that even larger spaces can be filled with rich, clear audio without distortion. The amplifier is built with advanced Class D technology, which not only contributes to superior sound quality but also improves energy efficiency. This results in less heat generation and allows for a more compact design that can fit seamlessly into any environment.

The SAS-1 supports both stereo and mono configurations, offering flexibility for various applications. Whether you're setting up a dedicated home theater or creating a multi-room audio system, this amplifier can adapt to your needs. Its ability to handle different speaker configurations makes it an excellent choice for custom installations.

Connectivity is another strong point of the Niles Audio SAS-1. The amplifier boasts multiple inputs, including both line-level and speaker-level connections, allowing for easy integration with existing audio sources. For enhanced convenience, it features IR control which provides easy operation without needing to access the device directly. This is particularly beneficial for installations in hard-to-reach areas.

The SAS-1 is also designed with durability and reliability in mind. Its robust construction ensures the amplifier can withstand the demands of daily use while maintaining high performance. Furthermore, the rear panel features a variety of connections, allowing for straightforward wiring and setup, making it suitable for both seasoned audiophiles and those new to audio systems.

Another noteworthy aspect of the Niles Audio SAS-1 is its sleek and understated design. It can blend into most home environments without being obtrusive, ensuring the focus remains on the audio experience rather than the equipment itself.

In summary, the Niles Audio SAS-1 is an exceptional amplifier that combines power, versatility, and efficiency. Its advanced features and robust build make it an ideal choice for anyone looking to enhance their audio experience, whether for casual listening or immersive home theater applications. By integrating cutting-edge technology with user-friendly design, the SAS-1 stands out as a popular choice among audio enthusiasts.
Top Page Image Contents