For details | NETGEAR RNDP6310-100NAS manual

You can obtain information about the status of your unit by reviewing the indicators listed in the following table.

Item	Description

Power button and LED	Press this button to turn on the ReadyNAS. The LED has these states:
	• Blinking. Booting
	• Blue. Powered on
	• Off. Powered off

Disk LEDs (1, 2, 3, 4)	Each disk bay has an LED associated with it, in numerical order from left to right,
	along the top of the front panel of the unit. The disk LEDs have these states:
	• On. Power is on and the disk is operating normally.
	• Blinking. The disk failed or is resynchronizing. See the status display screen
	for details.
	• Off. The disk bay is empty.

Disk activity LED	The disk activity LED has these states:
	• Blinking green. A disk is active.
	• Off. No disks are active.

Rear panel Ethernet port	Two LED status indicators are built into these ports. One LED indicates port
LEDs	activity. The other LED indicates connection speed as follows:
	• Green. The port is operating at 1,000 Mbps.
	• Amber. The port is operating at 100 Mbps.
	• Off. The port is operating at 10 Mbps.

Status display screen	Displays messages about the status of your unit. Note that the status display
	screen goes to sleep to prevent burn-in; to wake it, press the Power button. If the
	unit reports an abnormal operation or error, the status display screen stays on.

for details.