NETGEAR Pioneer Edition manual Volume Management for Flex-RAID, Deleting a Volume

ReadyNAS Pro Pioneer Edition User Guide

•X-RAID2:

–One-volume technology, but supports volume expansion, either with the addition of more disks or the replacement of an existing disk with larger capacity disks.

–You can start out with one disk, and add more disks as you need them or can afford them.

–Volume management is automatic. Add a second disk, and it becomes a mirror to the first. Add a third disk and your capacity doubles; add a fourth, and your capacity triples, and so on up to a fifth—the expansion occurring while redundancy is maintained.

–In the future, you will be able to replace disks, one at a time, have each one finish rebuilding and, after new redundant space becomes available, your volume will automatically expand to utilize the new capacity.

Volume Management for Flex-RAID

If you want to reconfigure the default volume C, split it into multiple volumes, or specify a different RAID level, you need to reconfigure your volume. The first step is to delete the existing volume you want to replace.

Deleting a Volume

To delete a volume, select the Volume tab of the volume you wish to delete (if there are multiple volumes) and click Delete Volume (in this case only Volume C is configured).

Warning: Make sure that you back up the files you wish to keep before deleting a volume. All shares files residing on that volume will be deleted are non- recoverable!

Figure 2-15

You are asked to confirm your intention by typing DELETE VOLUME.

Figure 2-16

2-14 Setting Up and Managing Your ReadyNAS Pro

v1.0, December 2008