Button Descriptions
Item | Description | |
|
| |
Factory | Press the Factory Reset button for 1 second, and release it to | |
Reset | return the Powerline adapter to its factory default settings. | |
button |
|
|
Security | • | After you plug in your new AV adapter, press the Security |
button |
| button for 2 seconds, and then press the Security button on |
|
| one of the other AV adapters in your existing network for 2 |
|
| seconds. Both buttons must be pressed within 2 minutes. |
| • | Press the Security button for 10 seconds to put the adapter |
|
| into power saving mode. Press the Security button again |
|
| for 0.5 seconds to wake it. |
|
| |
Filtered | The filtered AC socket can remove some electrical noise that | |
AC Socket | might affect Powerline performance. Plugging the power plugs | |
| of nearby devices into the filtered AC socket might improve | |
| performance. | |
|
|
|
Warning: Do not press the Security/Power button on the Powerline adapter until installation is complete, and the adapters are communicating with each other (indicated by the blinking Powerline LED). Pressing this button too soon can temporarily disable Powerline communication. If Powerline communication becomes disabled, press the Factory Reset button to return the Powerline adapter to its factory default settings.
5