NETGEAR RN10400100NAS, RN31400-100NAS manual Adding a Third and Fourth Disk for More Capacity

Page 39

NETGEAR ReadyNAS User Guide

within a few hours, your data volume will be fully redundant. The process occurs in the background, so access to the ReadyNAS is not interrupted.

Adding a Third and Fourth Disk for More Capacity

At a certain point, you will want more capacity. With typical RAID volumes, you have to back up your data to another system (with enough space), add a new disk, reformat your RAID volume, and restore your data back to the new RAID volume.

Not so with X-RAID. Simply add the third disk using the ReadyNAS hot-swap trays. If you are adding multiple disks at the same time, or if your ReadyNAS is not hot-swap capable, power down the ReadyNAS, add the disk(s), and power back on. The X-RAID device initializes and scans the newly added disk(s) for bad sectors in the background. You can continue working normally without any lag in performance. When the process finishes, you will be alerted by e-mail to reboot the device.

During the boot process, your data volume will be expanded. This process typically takes about 15 to 30 minutes per disk to several hours or longer, depending on the size of your disks, or the quantity of data on your volume. A 250 GB disk takes approximately 30 minutes. Access to the ReadyNAS is not permitted during this time. You will be notified by e-mail when the process is complete.

After you receive your e-mail, the ReadyNAS will have been expanded with the capacity from your new disk(s).

Replacing All Your Disks for More Capacity

A year or so down the line when you find the need more disk space, and 600 GB disks are available at an attractive price, you can expand your volume capacity by replacing the existing disks. Keep in mind that you must power down several times to replace out your old disks.

First, power down the ReadyNAS, replace the first disk with the large-capacity disk, and then reboot. If your ReadyNAS supports hot-swapping, you can hot-swap the disk without powering down. The ReadyNAS will detect that a new disk was put in place and resynchronizes the disk with data from the removed disk. This process takes several hours, depending on disk capacity. The disk is initialized and scanned for bad sectors first before the rsync process is started. The total time from the start of initialization to the end of resynchronization can be around 5 hours or more, depending on disk capacity. You will be notified by e-mail upon completion.

Upon completion, power down, replace the second disk with another large-capacity disk, and reboot. This process is the same as for the first disk; repeat this process for the third and fourth disks, as well.

Configuring Your ReadyNAS

1-27

v1.0, October 2007

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Netgear ReadyNAS User Guide Certificate of the Manufacturer/Importer Technical SupportTrademarks Statement of ConditionsProduct and Publication Details V1.0, October Contents Chapter Accessing Shares from Your Operating System Appendix a RAID Levels Simplified Viii Contents About This Manual Bold Conventions, Formats, and ScopeHow to Print This Manual How to Use This ManualRevision History Chapter Configuring Your ReadyNAS Specifying Your Ethernet Connection Settings Netgear ReadyNAS User Guide Netgear ReadyNAS User Guide Global Network Settings Default GatewayHostname Wins DNS SettingsAdmin Password Setting Up SecuritySecurity Mode Netgear ReadyNAS User Guide Share Security Mode User Security Mode Domain Security Mode Managing Groups Setting Up User and Group AccountsNetgear ReadyNAS User Guide Managing Users Netgear ReadyNAS User Guide Setting Accounts Preferences Selecting Services for Share AccessStandard File Protocols Streaming Services Netgear ReadyNAS User Guide Discovery Services Understanding Volume ManagementFlex-RAID Volume Management for Flex-RAIDAdding a Volume Deleting a VolumeNetgear ReadyNAS User Guide RAID Settings Adding a Second Disk for Redundancy Volume Management for X-RAIDReplacing All Your Disks for More Capacity Adding a Third and Fourth Disk for More CapacityChanging between X-RAID and Flex-RAID Modes SnapshotsTaking and Scheduling Snapshots Netgear ReadyNAS User Guide Netgear ReadyNAS User Guide Resizing Snapshot Space USB StorageNtfs USB Flash Device Option Managing Your SharesAdding Shares Managing Shares Setting Share Access in Share Mode 192.168.2., 192.168.2.0/255.255.255.0, 192.168.2.0/24 Setting Share Access in User and Domain ModesHosts allowed access 192.168.2.101 Netgear ReadyNAS User Guide Advanced Options USB Shares Configuring Backup Jobs Select Backup Source Adding a New Backup JobMyfolder media/Videos My Folder Choose Backup Schedule Select Backup DestinationChoose Backup Options All Logs link Viewing the Backup Schedule Viewing the Backup Log Programming the Backup ButtonSetting Up Printers Editing a Backup JobPrint Shares over CIFS/SMB IPP Printing Managing Print Queues Managing Your ReadyNAS System ClockSystem Time Alerts NTP OptionAlerts Contacts Snmp Alerts SettingsNetgear ReadyNAS User Guide Smtp PerformanceNetgear ReadyNAS User Guide Adding a UPS for Performance Language Updating ReadyNAS Remote UpdateLocal Update Power Management SettingsFactory Default Disk Spin-Down Option Power TimerShutdown UPS ConfigurationNetgear ReadyNAS User Guide Netgear ReadyNAS User Guide Windows Accessing Shares from Your Operating SystemMAC OS AFP over Bonjour AFP over AppleTalk Netgear ReadyNAS User Guide MAC OS Linux/Unix Mount ipaddr/backup /backupWeb Browser Netgear ReadyNAS User Guide Netgear ReadyNAS User Guide FTP/FTPS Rsync # rsync -a ipaddrbackup /tmpNetworked DVD Players and UPnP AV Media Adapters Netgear ReadyNAS User Guide Health Viewing System StatusLogs Ordering a Replacement Disk Replacing a Failed DiskReplacing a Failed Disk on the ReadyNAS NV+ Replacing the Failed Disk on the ReadyNAS Replacing the Failed Disk on the ReadyNAS 600/X6 Resetting Your System System Switch Resynchronizing the VolumeConfiguring RAID on the ReadyNAS 1100 and NV+ Netgear ReadyNAS User Guide Backing Up the ReadyNAS to a USB Drive ReadyNAS NV+ Backup ReadyNAS1100 BackupRemoving the System Module from the ReadyNAS Changing User PasswordsNetgear ReadyNAS User Guide RAID Level Appendix a RAID Levels SimplifiedRAID Level X X-RAID ReadyNAS Host Name Domain or Workgroup NameHost Host NameUser or Group Name Share PasswordShare Name Snmp CommunityUser Password Netgear ReadyNAS User Guide Appendix C Glossary Netgear ReadyNAS User Guide Numerics IndexNetgear ReadyNAS RAIDiator 3.01 Administration Manual Index-3 Index-4 Index-5 Index-6 Index-7 Index-8

RN10223D-100NAS, RN31400-100NAS, RN31441E-100NAS, RN10400100NAS specifications

NETGEAR has established itself as a leading provider of networking solutions, particularly in the area of network-attached storage (NAS) devices. Among its range of products, the NETGEAR RN31400-100NAS, RN10223D-100NAS, RN10400100NAS, and RN31441E-100NAS stand out due to their robust features, advanced technologies, and reliability in data storage and management.

The NETGEAR RN31400-100NAS is a 4-bay NAS solution designed for small to medium-sized businesses. It is powered by an Intel dual-core processor, enabling fast performance and efficient multitasking. With support for XRAID technology, this device simplifies disk management and provides redundancy, ensuring data protection against drive failures. The RN31400 also offers built-in support for various file-sharing protocols including CIFS, NFS, and FTP, making it a versatile choice for different operating environments.

Moving to the RN10223D-100NAS, this 2-bay model is specifically tailored for home use or small offices. It offers a user-friendly interface and simple setup process, empowering users to create their own personal cloud storage with ease. Featuring RAID support and automatic backup capabilities, the RN10223D ensures that vital data is secured while providing access across multiple devices. This model also supports multimedia streaming, making it an ideal choice for users who wish to store and share photos, videos, and documents effortlessly.

The RN10400100NAS is another noteworthy NAS option from NETGEAR, featuring a 4-bay design suitable for larger environments. Its storage capacity can be expanded significantly, providing flexibility for growing businesses. Equipped with dual Gigabit Ethernet ports, this device offers link aggregation options for enhanced network performance. Moreover, compatibility with VPN helps remote users access files securely, adding an extra layer of convenience and security.

Lastly, the RN31441E-100NAS is known for its enterprise-class functionality. This 4-bay system boasts high-speed data transfer, ideal for heavy workloads and intensive applications. Its robust security features include advanced user access controls and encryption capabilities, making it a suitable choice for organizations that prioritize data integrity. The RN31441E also offers seamless integration with cloud services, allowing for off-site backups and data redundancy.

In summary, the NETGEAR RN31400-100NAS, RN10223D-100NAS, RN10400100NAS, and RN31441E-100NAS are exceptional NAS solutions that cater to various needs, from personal file storage to critical business applications. With their advanced technologies, robust features, and ease of use, these devices stand as reliable options for anyone looking to enhance their data management strategy.
Top Page Image Contents