NETGEAR WNCE3001-100NAS user manual Device Status settings, Advanced Settings

Page 13

Universal Dual Band WiFi Internet Adapter (WNCE3001)

The following table describes the fields in the Device Status screen.

Table 1. Device Status settings

Field

 

Description

 

 

 

Device Status

Hardware Version

The hardware version of the Internet adapter.

 

 

 

 

Firmware Version

The current firmware version of the Internet adapter.

 

 

If you upgrade the firmware, this field changes.

 

 

 

 

GUI Language Version

The language version running on the Internet

 

 

adapter. If you upgrade the firmware, this field might

 

 

change.

 

 

 

Wireless Connection

Wireless Connection

The status of your wireless connection (connected or

Status

 

disconnected).

 

Link Rate (Tx/Rx)

The actual transmission (Tx) and receive (Rx) link

 

 

rate in the current wireless connection.

 

 

 

 

Name (SSID)

Your Internet adapter is set up to connect to this

 

 

SSID, also called the wireless name.

 

 

 

 

Region

The location of the Internet adapter.

 

 

 

 

Channel

The wireless channel of the network.

 

 

 

 

Security Type

The security setting for the wireless network.

 

 

 

LAN Port

MAC Address

The physical address of the Internet adapter, as

 

 

seen from the local area network (LAN).

 

IP Address

The IP address of the Internet adapter. The default is

 

 

192.168.1.251.

 

 

 

 

DHCP Server

Identifies the network DHCP server on the wireless

 

 

network.

 

 

 

 

Subnet Mask

The IP subnet mask associated with the LAN IP

 

 

address of the Internet adapter. The default is

 

 

255.255.255.0.

 

 

 

 

Default Gateway

The IP address of the wireless network gateway.

 

 

 

 

DNS Server

The IP address of the Domain Name Server (DNS)

 

 

of the wireless network.

 

 

 

Advanced Settings

13

Image 13 Contents
Universal Dual Band WiFi Internet Adapter WNCE3001 Technical Support Universal Dual Band WiFi Internet Adapter WNCE3001Trademarks Statement of ConditionsTable of Contents Unpack Your Adapter Package contentsUSB port Ethernet port Reset Hardware FeaturesTop Panel with LED Rear PanelPower Connection Options InstallationPeel off the protective film  To install your Internet adapterFor optimal performance, install the stand  To change your Internet adapter settings Prepare to Change Your Internet Adapter Settings After installation, to use the Smart Wizard again Use the Smart Wizard to Change the SetupInstallation Guide Device Status Screen Advanced SettingsAdvanced Settings Device Status settingsShow Statistics fields Show StatisticsDhcp Connection Status IP AddressConnection Status fields Back Up Settings Manage Your Configuration SettingsRestore Settings Upgrade the FirmwareErase the Settings  To check for firmware and upgrade if it is available Advanced Wireless Settings To view or change the advanced wireless settings Use Push N Connect WPS  To join a network using WPS after installationPush N Connect recommended . Either click Universal Dual Band WiFi Internet Adapter WNCE3001 Using the USB Power Cable TroubleshootingTroubleshooting Connect to Wireless NetworksReset button Factory SettingsFactory Settings and Technical Specifications Technical SpecificationsFCC RF Radiation Exposure and SAR Statements Safety and Regulatory NoticesFCC Statement SAR StatementNotification of Compliance Europe EU Declaration of ConformityFid-Dirrettiva 1999/5/EC