After entering the WEP keys in the key field, click the OK button and then click the Apply button on the Configuration tab to make the setting take effect.
Important: The WEP key must be set up exactly the same on the Wireless LAN stations as they are on the wireless Access Points.
Security |
|
Enable | Enables the data encryption for the wireless node. To disable the data |
Encryption | encryption (by unchecking the box) is to not use any encryption; this is |
(WEP Key) | also called Open System data encryption. To enable encryption is to use |
| the Shared Key data encryption method. |
Key Length | The key length must be the same between all wireless nodes and |
| access points in the same network. The possible values for the data |
| encryption level are 64 bits and 128 bits. The |
| also called |
| information on data encryption, please refer to Chapter 7: Wireless |
| Network Fundamentals in this reference guide. |
Key 1 | Keys used to encrypt/decrypt wireless data. When set to |
Key 2 | called |
Key 3 | four different keys to encrypt wireless data. |
Key 4 |
|
22