XE102 Wall-Plugged Ethernet Bridge User Guide
HomePlug Light Not On
If the power light is on but the HomePlug light is not, check the following:
•Make sure that power is being provided to more than one PowerLine device. Another PowerLine device must be installed for successful communication across the PowerLine.
•Verify that the network password is the same on all devices in the PowerLine network.
Ethernet Light is Off
•Make sure that the Ethernet cable is plugged in properly to a router LAN port.
•On the attached Ethernet device or network adapter card, check that the Link light is on.
Default Configuration Settings
The following table shows default settings for the XE102
Table 8. PowerLine Device Default Configuration Settings
Feature
Network
Description
Port Speed
Port Duplex
10/100 Mbps,
Auto uplink
Administration
Device password
See product label.
PowerLine
Encryption password
HomePlug
12