NETGEAR XAV1601 user manual Regulatory Compliance Information

Page 28

XAV1601 Powerline AV+ 200 Nano User Manual

The voltage and current rating of the cable should be greater than the ratings marked on the product.

•To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outlets.

•Do not use adapter plugs. If you must use an extension cable, use a three-wire cable with properly grounded plugs.

•Observe extension cable and power strip ratings. Make sure that the total ampere rating f all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.

•To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

•Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure that nothing rests on any cables.

•Do not modify power cables or plugs.

•Always follow your local and national wiring rules.

Regulatory Compliance Information

This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.

This product's firmware limits operation to only the channels allowed in a particular Region or Country. Therefore, all options described in this user's guide may not be available in your version of the product.

FCC Requirements for Operation in the United States

FCC Information to User

This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Guidelines for Human Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

28 Appendix B. Notification of Compliance

Page 27 Page 29
Image 28
Page 27 Page 29
Contents XAV1601 Powerline AV+ Nano Technical Support TrademarksStatement of Conditions Revision HistoryContents Installation and Basic Configuration How the XAV1601 Fits in Your NetworkLED and Feature Descriptions Powerline XAV1601 Nano FeaturesXAV1601 Product Label Model Number Feature Descriptions Installing Your Powerline XAV1601 Nano Prepare for InstallationConnecting a Powerline AV+ 200 Nano to the Router Connecting the XAV1601 to a RouterTo add Powerline adapters Adding Adapters to Your NetworkSet the Encryption Key Understanding Powerline Network SecurityTo set a private encryption key Installation and Basic Configuration Using the XAV1601 Powerline Utility Installing the Powerline UtilityPowerline Utility Screen Navigate to Start Programs Netgear Netgear Powerline UtilityReturn to the Default Network Encryption Key Click the Use Default Encryption Key buttonSecurity Icon Click Apply Security to Selected DevicesTo name any Powerline device in your Powerline network Change the Name of a Powerline DeviceTurn LEDs On or Off Set the Powerline Encryption Key To set the encryption keyTo reset to factory defaults Reset a Device to Factory SettingsClick the Apply Security to Selected Devices button Add a Device to a Powerline Network Set Up Quality of Service QoSTo add a device from a locally connected computer To prioritize by general application typeUsing the XAV1601 Powerline Utility Using the XAV1601 Powerline Utility Product Registration and Support Basic FunctioningLED Troubleshooting Tips LED and Feature TroubleshootingProblems after Changing the Network Encryption Key Technical Specifications Supplemental InformationSafety Information Electromagnetic EmissionsAppendix A. Supplemental Information Netgear Powerline Products Notification of ComplianceRegulatory Compliance Information FCC Requirements for Operation in the United StatesFCC Declaration Of Conformity GPL License Agreement Index Index

XAV1601 specifications

The NETGEAR XAV1601 is a powerful powerline adapter designed to extend your home network effortlessly and reliably. This device leverages existing electrical wiring to transform every outlet in your home into a potential internet access point. Through the use of powerline technology, the XAV1601 delivers high-speed internet connectivity, ideal for streaming HD video, online gaming, and all other bandwidth-intensive activities.

One of the standout features of the NETGEAR XAV1601 is its impressive data transfer rates, with capabilities reaching up to 500 Mbps. This ensures a robust and stable connection, allowing multiple devices to be connected simultaneously without compromising performance. It's particularly beneficial for larger homes where Wi-Fi signals may struggle to reach certain areas.

Setting up the XAV1601 is quick and straightforward. Users only need to plug the adapter into an electrical outlet and connect it to their router via an Ethernet cable. Additionally, the device supports QoS (Quality of Service), which prioritizes bandwidth for specific applications or devices, enhancing the overall user experience for gamers and video streamers alike.

The XAV1601 also features two Ethernet ports, allowing it to connect multiple devices directly. This is especially useful for stationary devices like smart TVs, gaming consoles, or desktop computers that can benefit from a wired connection for maximum performance.

Another significant technological aspect of the XAV1601 is its compatibility with HomePlug AV technology. This standard ensures that the adapter can work seamlessly with other powerline devices, creating a unified home network that consistently extends reach and performance. Along with 128-bit AES encryption, security is emphasized, keeping your data safe as it navigates through your home’s electrical circuits.

Another attractive characteristic is its compact design. The small footprint allows for unobtrusive placement in your home without blocking adjacent outlets. Additionally, the LED indicators on the device allow users to monitor powerline network status, signal strength, and connection quality easily.

In summary, the NETGEAR XAV1601 stands out as a robust solution for extending home networks using existing electrical infrastructure. With high-speed data transfer, easy setup, multiple Ethernet ports, and strong security features, it is an excellent choice for anyone looking to enhance their home internet connectivity. Whether for gaming, streaming, or simply improving general internet access throughout the home, the XAV1601 is a reliable and efficient powerline networking solution.
Top Page Image Contents