NETGEAR WPN824EXT manual Feature Default Setting Electromagnetic Emissions

RangeMax WiFi Range Extender WPN824EXT User Manual

Table A-1. WiFi Range Extender Default Configuration Settings (continued)

Feature Default Setting

Electromagnetic Emissions

Meets requirements of

FCC Part 15 Class B

VCCI Class B

EN 55 022 (CISPR 22), Class B C-Tick N10947

Interface Specifications

LAN	10BASE-T or 100BASE-Tx, RJ-45
Internet	10BASE-T or 100BASE-Tx, RJ-45
Wireless	Maximum wireless signal rate complies with the IEEE
	802.11 standard. Actual throughput will vary. Network
	conditions and environmental factors, including volume of
	network traffic, building materials and construction, and
	network overhead, lower actual data throughput rate.
Radio Data Rates	1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps
	Auto Rate Sensing
Frequency	2.4–2.5 Ghz
Data Encoding	802.11b: Direct Sequence Spread Spectrum (DSSS)
	802.11g: Orthogonal Frequency Division Multiplexing
	(OFDM)
Maximum Computers Per Wireless	Limited by the amount of wireless network traffic generated
Network	by each node. Typically 30–70 nodes.
Operating Frequency Ranges	2.412–2.462 GHz (US)
	2.457–2.462 GHz (Spain)
	2.412–2.484 GHz (Japan)
	2.457–2.472 GHz (France)
	2.412–2.472 GHz (Europe ETSI)
802.11 Security	40 bit (also called 64 bit) and 128 bit WEP, WPA-PSK and
	WPA2-PSK.

a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network con- ditions and environmental factors, including volume of network traffic, building materials and construction, and network over- head, lower actual data throughput rate.

Technical Specifications A-3

v1.0, April 2008