NETGEAR user manual Software in or Upgrading the WG311T Software

Page 42

NETGEAR 108 Mbps Wireless PCI Adapter WG311T User Manual

Table 3-1. Troubleshooting Tips (continued)

Problem

Action

 

 

The Smart Wizard keeps asking me to save

If you change the settings the Smart Wizard offers you the

settings.

chance to save the changes. To avoid this prompt, simply click

 

Apply before you close the Smart Wizard.

Two WG311T icons are in the system tray.

You have an older software version installed on your system

 

and it needs to be removed. See “Removing the WG311T

 

Software” in Chapter 1 or “Upgrading the WG311T Software”

 

in Chapter 1.

I can connect to the access point, but not

This could be a physical layer problem or a network

the other computers on the network or to

configuration problem.

the Internet.

1. Check to make sure that the access point is physically

 

connected to the Ethernet network.

 

2. Make sure that the IP addresses and the Windows

 

networking parameters are all configured correctly. See

 

the link to “Internet Networking and TCP/IP Addressing:” in

 

Appendix B, “Related Documents”.

 

3. Restart the cable or DSL modem, router, access point, and

 

computer.

 

 

Viewing the IP address.

To view the WG311T Wireless PCI Adapter IP address, click

 

the WG311T icon to open the Smart Wizard. Then check the

 

IP address in the About page.

No IP address is assigned to the WG311T

This may occur if you upgraded your WG311T Wireless PCI

Wireless PCI Adapter.

Adapter software and did not reboot your system.

 

• Either restart your computer, or connect to a different access

 

point.

 

• It does not usually help to shut down the Smart Wizard or

 

disable/enable the card.

 

 

3-2

v5.0, January 2007

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Netgear 108 Mbps Wireless PCI Adapter Technical Support Europe EU Declaration of Conformity Λοιπεσ Σχετικεσ Διαταξεισ ΤΗΣ Οδηγιασ 1999/5/ΕΚ Product and Publication Details V5.0, January Contents Chapter Troubleshooting About This Manual Conventions, Formats and ScopeHow to Use This Manual How to Print this ManualPrinting the Full Manual Xii Chapter Basic Setup What You Need Before You BeginVerify System Requirements What Is in the Box WG311T Default Wireless SettingsObserve Wireless Location and Range Guidelines Installation V5.0, January Hidden Connecting to Wireless Networks and the Internet Smart Wizard Status Bar Understanding the Status BarWG311T Icon Colors WG311T LEDsRemoving the WG311T Software Upgrading the WG311T SoftwareV5.0, January Network Connections and Wireless Security Disabling the Windows Zero Configuration UtilityUnderstanding the Smart Wizard Viewing Networks in Your AreaInternet connection Finding a Network Profiles Adding ProfilesSetting up a Profile to Connect to an Access Point or Router Setting up a Computer-to-Computer Ad Hoc Profile Ping -t 192.168.0.1 and then click OK Starting a Computer-to-Computer Ad Hoc Network Connection Wireless Security Using Wireless Security FeaturesWireless Network Name Ssid and Security Settings If WEP Authentication is UsedSetting up WEP Encryption Security Setting up WPA2-PSK Security V5.0, January Setting up WPA-PSK Security Advanced Settings Statistics About Chapter Troubleshooting Troubleshooting TipsSoftware in or Upgrading the WG311T Software Ad Hoc Mode is Not Working Correctly Windows XP Occasional Connection ProblemsV5.0, January Appendix a Technical Specifications LEDV5.0, January Appendix B Related Documents Index.htmAppendix B-2
Related manuals
Manual 54 pages 28.16 Kb

WG311T specifications

The NETGEAR WG311T is a popular wireless PCI adapter designed to deliver high-speed connectivity for desktop computers. It is an ideal solution for users looking to enhance their home or office network without the hassle of running Ethernet cables. The WG311T operates on the IEEE 802.11g standard, allowing for wireless transmission rates of up to 54 Mbps, while also being backward compatible with 802.11b devices, ensuring versatility in mixed network environments.

One of the standout features of the WG311T is its utilization of advanced technologies such as MIMO (Multiple Input Multiple Output). This technology leverages multiple antennas to improve signal quality and enhance data throughput. MIMO significantly reduces interference and improves the range of the wireless connection, making the WG311T an excellent choice for users in larger spaces or households with multiple walls that might obstruct signals.

Another characteristic of the WG311T is its support for WEP, WPA, and WPA2 security protocols. This range of security options ensures robust protection against unauthorized access, allowing users to secure their networks without compromising connectivity. NETGEAR has also incorporated its Smart Wizard setup, a user-friendly interface that simplifies the installation process. This feature is particularly beneficial for novice users who may lack technical expertise, as it guides them through the setup in an intuitive manner.

The WG311T also comes with a detachable, high-gain antenna, further enhancing its connectivity potential. Users can easily replace or adjust the antenna to optimize signal strength based on their specific environment. Additionally, the adapter is compatible with various operating systems, including Windows and Linux, making it a flexible solution for different users.

In terms of design, the WG311T is compact, fitting easily into standard PCI slots in most desktop computers. Its straightforward design does not detract from the overall aesthetic of the computer.

In summary, the NETGEAR WG311T wireless PCI adapter stands out for its high-speed connectivity, advanced MIMO technology, robust security features, and user-friendly installation process. It is an ideal choice for users seeking reliable wireless performance in their networking setups, making it a staple in many homes and offices.
Top Page Image Contents