Wireless Channel Selection, Frequency Spread

Wireless Channel Selection

IEEE 802.11 wireless nodes communicate with each other using radio frequency signals in the ISM (Industrial, Scientific, and Medical) band between 2.4Ghz and 2.5Ghz. Neighboring channels are 5Mhz apart. However, due to spread spectrum effect of the signals, a node sending signals using a particular channel will utilize frequency spectrum12.5Mhz above and below the center channel frequency. As a result, two separate wireless networks using neighboring channels (for example, channel 1 and channel 2) in the same general vicinity will interfere with each other. Applying two channels that allow the maximum channel separation will decrease the amount of channel cross-talk, and provide a noticeable performance increase over networks with minimal channel separation

Channel	Center Frequency	Frequency Spread
1	2412Mhz	2399.5Mhz – 2424.5Mhz
2	2417Mhz	2404.5Mhz – 2429.5Mhz
3	2422Mhz	2409.5Mhz –2434.5Mhz
4	2427Mhz	2414.5Mhz –2439.5Mhz
5	2432Mhz	2419.5Mhz – 2444.5Mhz
6	2437Mhz	2424.5Mhz –2449.5Mhz
7	2442Mhz	2429.5Mhz –2454.5Mhz
8	2447Mhz	2434.5Mhz – 2459.5Mhz
9	2452Mhz	2439.5Mhz –2464.5Mhz
10	2457Mhz	2444.5Mhz –2469.5Mhz
11	2462Mhz	2449.5Mhz – 2474.5Mhz
12	2467Mhz	2454.5Mhz – 2479.5Mhz
13	2472Mhz	2459.5Mhz – 2484.5Mhz

Note: The available channels supported by the wireless products in various countries are different.

The preferred channel separation between the channels in neighboring wireless networks is 25 MHz (5 channels). This means that you can apply up to three different channels within your wireless network. There are only 11 usable wireless channels in the United States. It is recommended that you start using channel 1 and grow to use channel 6, and 11 when necessary.