Clarion RDX655DZ Basic Operations, Setting the Z-enhancer, Adjusting the tone, Adjusting the bass

Basic Operations

∗When you have entered a title in a CD, it ap- pears in the sub display. If you have not en- tered a title, “NO-TITLE” appears in the title display instead. For information on how to en- ter a title, refer to the subsection “Entering titles” in the “Other Handy Functions”.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “OFF”.

Each time you press Z-EHCR button 8, the tone effect changes in the following order:

“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z-

ENHANCER 3” ➜ “OFF” ➜ “Z-ENHANCER 1”...

•Z-ENHANCER 1: bass emphasized

•Z-ENHANCER 2: treble emphasized

•Z-ENHANCER 3: bass and treble emphasized

• OFF : no sound effect

Adjusting the tone

Press A-M button $ and select the item to adjust. Each time you press A-M button $, the item changes in the following order:

●When Z-enhancer 1, 2 or 3 is set

“Z-EHCR” ➜ “BAL” ➜ “FAD” ➜ Function

mode...

Adjusting the bass

1.Press A-M button $ and select “BASS”.

2.Turning the Rotary knob & clockwise empha- sizes the bass; turning it counterclockwise attenuates the bass.

∗The factory default setting is “0”. (Adjustment range: –6 to +6)

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Adjusting the treble

1.Press A-M button $ and select “TREB”.

2.Turning the Rotary knob & clockwise empha- sizes the treble; turning it counterclockwise attenuates the treble.

∗The factory default setting is “0”. (Adjustment range: –6 to +6)

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Adjusting the balance

1.Press A-M button $ and select “BAL”.

2.Turning the Rotary knob & clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Adjusting the fader

1.Press A-M button $ and select “FAD”.

2.Turning the Rotary knob & clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Adjusting the Z-enhancer

1.Press Z-EHCR button 8 and select the Z- enhancer mode (1 to 3) to adjust.

2.Press A-M button $ and select “Z-EHCR”.

3.Turning the Rotary knob & clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.

∗When Z-enhancer 1 is selected, you can adjust the bass in the range of ±2.

∗When Z-enhancer 2 is selected, you can adjust the treble in the range of ±2.

∗When Z-enhancer 3 is selected, you can adjust the bass and treble in the range of ±2.

4.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

RDX655Dz 11