NETGEAR WGPS606 manual WEP Wireless Security, WEP Authentication

Page 44

Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch

WEP Wireless Security

The absence of a physical connection between nodes makes the wireless links vulnerable to eavesdropping and information theft. To provide a certain level of security, the IEEE 802.11 standard has defined two types of authentication methods, Open System and Shared Key. With Open System authentication, a wireless PC can join any network and receive any messages that are not encrypted. With Shared Key authentication, only those PCs that possess the correct authentication key can join the network. By default, IEEE 802.11 wireless devices operate in an Open System network. Recently, Wi-Fi, the Wireless Ethernet Compatibility Alliance (http://www.wi-fi.net) developed the Wi-Fi Protected Access (WPA), a new strongly enhanced Wi-Fi security. WPA will soon be incorporated into the IEEE 802.11 standard. WEP and WPA are discussed below.

WEP Authentication

The 802.11 standard defines several services that govern how two 802.11 devices communicate. The following events must occur before an 802.11 Station can communicate with an Ethernet network through an access point such as the one built in to the WGPS606:

1.Turn on the wireless station.

2.The station listens for messages from any access points that are in range.

3.The station finds a message from an access point that has a matching SSID.

4.The station sends an authentication request to the access point.

5.The access point authenticates the station.

6.The station sends an association request to the access point.

7.The access point associates with the station.

8.The station can now communicate with the Ethernet network through the access point.

An access point must authenticate a station before the station can associate with the access point or communicate with the network. The IEEE 802.11 standard defines two types of WEP authentication: Open System and Shared Key.

•Open System Authentication allows any device to join the network, assuming that the device SSID matches the access point SSID. Alternatively, the device can use the “ANY” SSID option to associate with any available access point within range, regardless of its SSID.

B-4

Wireless Networking Basics

202-10083-01

Page 43 Page 45
Image 44
Page 43 Page 45
Contents 202-10083-01 Technical Support Iii Product and Publication Details Contents Chapter Advanced Configuration Glossary Contents Chapter About This Manual Audience, Scope, Conventions, and FormatsHow to Print this Manual Support for Standards About the Wireless USB Print ServerChapter Introduction Key Features 802.11g Standards-based Wireless NetworkingSystem Requirements Autosensing Ethernet Connections with Auto UplinkWhat’s In the Box? Bottom Label Description Power Socket WGPS606 Default Factory Settings Chapter Basic Installation and ConfigurationOverview of Wireless USB Print Server Setup Verify Printer and Network Readiness Understanding WGPS606 Wireless Security Options Observe these PrecautionsSet Up the Print Server Remove the Netgear CDNow, Set Up a PC Troubleshooting Tips Make sure the cables are pluggedHow to Log in Using the IP Address of the WGPS606 Two Ways to Log In to the WGPS606Login result WGPS606 home Using the IP Settings Options IP Settings Current IP AddressesUnderstanding the Basic Wireless Settings WGPS606 NameChapter Management Viewing General InformationGeneral Information Fields Backing Up the Wireless USB Print Server Settings Upgrading the Wireless USB Print Server SoftwareRestoring Factory Default Settings Using the Reset Button to Reboot or Restore Factory DefaultsChanging the Administrator Password Set PasswordManagement Chapter Advanced Configuration Understanding Advanced Wireless SettingsAdvanced Configuration Chapter Troubleshooting Printing Errors Basic FunctioningNothing is printing Differences in How Windows Handles Printing to the WGPS606Print server is not found Restoring the Default Configuration Windows Printer Port ManagementAppendix a Specifications Specifications for the WGPS606Specifications Infrastructure Mode Appendix B Wireless Networking BasicsWireless Networking Overview Wireless Channels Ad Hoc Mode Peer-to-Peer WorkgroupNetwork Name Extended Service Set Identification Essid Radio frequency channels used are listed in Table B-1 WEP Wireless Security WEP AuthenticationAccess point have the same WEP are described below Authentication Shared Key Steps Key Size and Configuration WPA Wireless Security How to Use WEP ParametersHow Does WPA Compare to WEP? How Does WPA Compare to Ieee 802.11i?What are the Key Features of WPA Security? Figure B-3 WPA Overview Wireless Networking Basics Figure B-4 802.1x Authentication Sequence WPA Data Encryption Key Management Temporal Key Integrity Protocol Tkip Is WPA Perfect? Product Support for WPAChanges to Wireless Network Adapters Changes to Wireless Client Programs Glossary NumericSee Dynamic Host Configuration Protocol Ethernet Internet service provider Megabits per second Set of rules for communication between devices on a network See Wide Area Network WPA
Related manuals
Manual 23 pages 35.1 Kb

WGPS606 specifications

The NETGEAR WGT624SC, GS608, GS605, XE103, and WGPS606 are key components in the networking ecosystem designed for various connectivity needs, offering reliable performance and innovative features.

The NETGEAR WGT624SC is a wireless router that operates on both the 2.4 GHz and 5 GHz bands. This dual-band capability allows for increased flexibility and speed, making it suitable for households with multiple devices. It supports 802.11g wireless technology, providing robust performance and ensuring a range that covers average-sized homes. With features like WPA2 security, users can enjoy safe wireless connections. The router also includes four LAN ports for wired connections, ensuring that devices like gaming consoles and desktop computers can connect seamlessly.

Moving to the NETGEAR GS608 and GS605, these unmanaged switches are designed for small to medium-sized networks. The GS608 is an 8-port Gigabit Ethernet switch, while the GS605 has five ports. Both models offer plug-and-play functionality, making them ideal for users who require easy setup without extensive configuration. The switches support auto-negotiation for optimal speed, as well as energy-efficient Ethernet technology to reduce power consumption during low traffic periods.

The NETGEAR XE103 is a unique solution in the realm of powerline networking. Utilizing existing electrical wiring, this powerline adapter allows users to extend their network without the need for long cable runs. It supports data rates suitable for streaming and online gaming, providing a reliable alternative for reaching difficult areas of a home where Wi-Fi signals may be weak.

Finally, the NETGEAR WGPS606 is a wireless print server that facilitates the connection of multiple printers to a wireless network. Ideal for small office setups or home environments, it supports various printer types and enables remote printing from any connected device.

Overall, these NETGEAR products exemplify a commitment to providing varied networking solutions that cater to different user requirements while maintaining high-quality performance and reliability.
Top Page Image Contents