Nlynx none manual Getting Started, Factory’s default settings of Adsl Ethernet Router

Heritage Series ADSL Bridge/ Router Quick Guide 1

Getting Started

This quick guide provides a quick and easy way to install and configure your ADSL Ethernet Router to match which do you need.

The major functions of the ADSL Ethernet Router are performed via Ethernet 10/100Base-T network interface. Your computer has to installed an Ethernet NIC card and set up the TCP/IP protocol before start to using your ADSL Ethernet Router.

The factory’s default settings of ADSL Ethernet Router

LAN IP address: 192.168.7.1

VPI: 0

VCI: 32

Encapsulation type: LLC

Connection Type: RFC1483 Bridged

Internal DHCP server: Disabled

Route function: Disabled

NAT function: Disabled

Use DNS, which located in your ISP: Disabled

Web-Configuration
Login Username: DSL	(upper case)
Password: DSL	(upper case)

Note:

1You have to change it, which assigned by your ISP, before you used.