NETGEAR FE116 manual Vista 100BASE-T Network Ports with Built-in LEDs

Vista 100BASE-T Network Ports with Built-in LEDs

The front panel of the Model FE116 hub has sixteen vista 100BASE-T ports. Two LEDs—the Link/Rx LED and the Part (partition) LED—are built into each 100BASE-T port.

vista 100BASE-T

network port

Link/Rx Part

LED LED

8494FA

Normal/Uplink Push Button

The Normal/Uplink push button on the Model FE116 hub allows you to select Normal (MDI-X) or Uplink (MDI) wiring for port 16, eliminating the need to use a crossover cable. Ports 1 to 15 on the hub are permanently configured for Normal wiring.

Rear Panel

The rear panel of the Model FE116 hub has a DC power jack and a ground clip (not used). The Model FE116 hub accepts 5 V DC.

Rear Panel of the Model FE116 Hub

100 BASE-TX Class

Ground clip

5Vdc 3.0A

– +

Power jack

8495FA

M-FE116NA-1 QCARD