Magnet Mounting the Switch
Inserting the Magnet
1
2
9640FA
Removing the Magnet
2
1
9641FA
Connecting the Network
To connect devices to the switch:
1.Connect the devices to the 10/100 Mbps ports on the switch, using category 5 UTP cable with an
Note: Ethernet specifications limit the total cable length between your PC and the switch to 328 feet (100 meters).
2.Connect the switch for specific devices:
•To connect to a PC or router, use port 5 Normal (or port 8 Normal). This connection is considered “normal.”
•To connect to a hub or another switch, use port 5 Uplink (or port 8 Uplink). This connection is considered “uplink.”
3.Connect one end of the DC power adapter cable to the power outlet on the rear panel of the switch and the other end of the power adapter cable to the wall outlet. Verifying
Model FS2105/FS2108 Fast Ethernet Switch Installation Guide