®
®
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054
USA
Support:
www.NETGEAR.com
M-GC102NA-0
START HERE
Congratulations on your purchase of the NETGEAR® Model GC102 Gigabit Ethernet Media Converter
This installation guide describes how to install and use the Model GC102 Gigabit Ethernet Media Converter .
FEATURES
The Model GC102 Gigabit Converter has the following features:
One
One SC connector port, using 62.5/125 micron multimode fiber cable to deliver
Auto Uplink on the
Easy
LEDs that provide network traffic and port status
IEEE 802.3x Flow Control standard compliance
Selector for Auto negotiation of flow control on the
Compact, sturdy metal case design that enables easy desktop,
PACKAGE CONTENTS
Wall mounr 
adapter installation kit
Installation guide, Warranty & Owner Registration Card, and Support Information Card
Verify that your package contains the following:
Model GC102 Gigabit Ethernet Media Converter
Wall Mounting kit
This installation guide
Warranty & Owner Registration Card
Support Information Card
Power adapter
Note: Do not remove the dust cover from the fiber port until you are ready to connect the fiber optic cable. Dust contamination can degrade the performance of the port and the media converter.
PRODUCT ILLUSTRATION
Copper Gigabit Ethetnet Port
The
With Auto Uplink technology, the GC102 automatically adjusts for either
Fiber Gigabit Ethernet Port
The SC port provides
LEDs
This table describes the activity of the Model GC102 Converter LEDs.
Label | Color | Activity | Description |
|
|
|
|
PWR(Power) | Green | On | Power is supplied to the Converter. |
|
| Off | Power is disconnected. |
|
|
|
|
LNK (Link) | Green | On | A valid link is established on the port. |
(located to the |
| Off | A link is not established on the port. |
right of each port) |
|
|
|
|
|
|
|
ACT (Activity) | Green | On | Packet transmission or reception is |
|
|
| occuring on the port. |
(located to the |
| Off | No traffic is passing through the port |
right of each port) |
|
|
|
|
|
|
|
Rear Panel
The rear panel of the Model GC102 Converter has a power adapter receptacle for the supplied power adapter, as well as a switch to select flow control for the fiber port. If the switch is in the 'ON' position, the GC102 will auto negotiate flow control on the SC connector. If the switch is in the 'OFF' position, the con- verter will not use flow control or respond to any negotiation message.
Note: The converter will determine the switch setting when powering up. Once the converter is operational, it ignores the switch position. If you want to change the setting, you must reset the
converter.
APPLICATIONS
The Model GC102 Gigabit Ethernet Converter is designed to provide flexibility for your network design. Converters can be used as a
Although the examples illustrate specific NETGEAR switches, any switches can be used in the network con- figurations shown.
Stand alone configuration
The GC102 can be used in to convert a fiber connection from a distant wiring closet to the desired copper gigabit connection that is needed. In this example, a GS524T is able to support a distant FS750 with an AG711F Fiber Gigabit module in it by using the GC102.
© 2002 by NETGEAR, Inc. All rights reserved.
Trademarks
©2002 NETGEAR, Inc. NETGEAR® , the Netgear Logo, the Gear Guy, and Everybody's connecting are trademarks or registered trademark of Netgear, Inc. in the United States and/or other countries. Microsoft, Windows, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the NETGEAR Model GC102 Converter has been suppressed in accordance with the conditions set out in the
for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations.
Voluntary Control Council for Interference (VCCI) Statement
This equipment is in the first category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing Equipment and Electronic Office Machines that are aimed at preventing radio interference in commercial and/or industrial areas.
Consequently, when this equipment is used in a residential area or in an adjacent area thereto, radio interference may be caused to equipment such as radios and TV receivers.
Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to take whatever measures may be necessary to correct the interference at their own expense.
EN 55 022 Statement
This is to certify that the NETGEAR Model GC102 Converter is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class A (CISPR 22).
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take appropriate measures.
Canadian Department of Communications Radio Interference Regulations
The digital apparatus (NETGEAR Model GC102 Converter does not exceed the Class A limits for radio- noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
Réglement sur le brouillage radioélectrique du ministère des Communications
Cet appareil numérique (NETGEAR Modle GC102 Converter respecte les limites de bruits radioélec- triques visant les appareils numériques de classe A prescrites dans les Réglementations sur le brouillage radioélectrique du Ministère des Communications du Canada.
M 1- G C 1 0 2 N A - 0