NetComm NB2800 manual Technical Specifications, Software Features, Package Contents

HOME & MICRO BUSINESS

BROADBAND ROUTER WITH 10/100 4-PORT SWITCH

NETWORKING & COMMUNICATIONS CONVERGED

N367

			Four 10/100
Reset	ADSL/Cable	Uplink port	auto-sensing
			switched ports	Power
button	modem	– connect to
	Ethernet port	another switch

TECHNICAL SPECIFICATIONS

Standards	IEEE 802.3 10BASE-T
Compliance	IEEE 802.3U 100BASE-TX
Interface	WAN: 1x10/100Mbps Ethernet RJ-45
	LAN: 4x10/100Mbps auto-sensing
	switch ports within one uplink
	port for LAN
Protocol	TCP/IP, UDP, NAT, DHCP, PPPoE,
	Telstra Heart Beat
	PAP, CHAP
Maximum Users	Up to 253 users
IP Setting	WAN: DHCP client, Static IP
	LAN: DHCP auto-assignment, Static IP
Management	Web-Base UI management
	Password authentication for
	configuration
	Fault-tolerance TFTP upgrade
	firmware
	WAN MAC address configuration
	Remote configuration
	Reset button for device reset &
	factory default
Security	NAT deny external intruder
	Filter: IP filter, URL filter, MAC
	filtering
Remote Access	Special Application
	Virtual server/Port forwarding
	DDNS
	Multiple Exposed Host (DMZ Host)
Routing	RIP1, RIP2 compatible
	Static Routing
	VPN (PPTP, IPSec) pass-through
LED Display	Power
	Diagnostic
	WAN: Link/Activity
	LAN: Link/Activity, FD/collision
Power	External, DC 5V, 1A
Environmental	Operation Temperature: 0~45°
	Storage Temperature:-20~70°
	Humidity 0~90% non-condensing

Flash ROM Firmware upgradeable via TFTP

Certification C-Tick

Dimension 87 (L) x 150 (W) x 30 (H) mm

Mounting Desktop or wall mount

SOFTWARE FEATURES

Allows multiple users to access Internet at the same time by providing maximum Internet utilisation to multiple users to share a single public IP Address.

Acts as both DHCP client and DHCP server for receiving WAN IP Address from ISP and configuring IP Addresses to LAN PCs.

Web-based user interface for easy configuration and management through web browser like Netscape Communicator 4.0 or later or Internet Explorer 4.0 or later.

Compatible with all popular Internet applications and Cable and ADSL Service Providers.

NAT security protects internal users from outside intruders.

Allows administrators to block certain users from accessing the Internet, specific applications, or certain web sites.

Can allow unrestricted two-way communication between one PC on your LAN and certain Internet services like conferencing, video and gaming applications.

Enhances the routing performance with Dynamic and Static routing options.

Allows change of WAN MAC address.

Allows authorised users to manage device remotely.

3 YEAR WARRANTY*

1 year warranty out of the box. Extra 2 years FREE with online

registration at www.netcomm.com.au

*Conditional upon registration online.

PACKAGE CONTENTS

•NB2800 ADSL/Cable Router

•Cat-5 RJ45 straight through Ethernet Cable

•Plug Pack 5VDC 1.0A,

Quick Start and Installation Guide

•Self-adhesive rubber feet

BASIC SYSTEM REQUIREMENTS

ADSL or Cable Modem with Ethernet connection port

PC running TCP/IP Ethernet ie: Windows®, Mac OS or Linux

PC equipped with 10/100 Ethernet Port

Web Browser

ADSL or Cable ISP service

240 Volt GPO (Power Point)

Note: Additional Cat-5 Ethernet Cables required for connection to multiple PCs.

NetComm is Australia’s dynamic data communications and

Your Netcomm dealer:	networking solutions provider. For more information on this and
	other NetComm products, please visit www.netcomm.com.au
	NetComm Limited ABN 85 002 490 486
	PO Box 1200, Lane Cove NSW 2066 Australia.
	PHONE (02) 9424 2070 • FAX (02) 9424 2010
	www.netcomm.com.au • EMAIL sales@netcomm.com.au
	Trademarks and registered trademarks are the property of NetComm
	Limited or their respective owners. Specifications are subject to change
	without notice. Images shown may vary slightly from the product.