
Connecting the Adjustable Antenna to the Card
After installing the Card on computer, connect external Antenna to the Card from the SMA connector. Hold the antenna in the desired orientation and then turn the lock nut clockwise until snug (do not over tighten the nut). To adjust the antenna direction, turn the nut counter clockwise one full turn, adjust the antenna and then tighten the nut.
After hardware installation is completed, please go to the Driver Installation section and follow the instructions for your operating system.
www.netcomm.com.au | Rev. 1 - YML678 |
Page 10 | NP5420 11G Wireless PC Card User Guide |