Nvidia 680i System Monitor, Load Defaults, Set Password, Save & Exit Setup, Exit Without Saving

Installing and Configuring the BFG NVIDIA nForce 680i LT SLI Motherboard

•System Monitor

Use this menu to monitor the real-time system status of your PC, including temperature, voltages, and fan speed.

The following items on the CMOS Setup Utility main menu are commands rather than submenus:

•Load Defaults

Load default system settings.

•Set Password

Use this command to set, change, and disable the password used to access the BIOS menu.

•Save & Exit Setup

Use this command to save settings to CMOS and exit setup.

•Exit Without Saving

Use this command to abandon all setting changes and exit setup.

The following item on the CMOS Setup Utility main menu is a status indicator:

•SLI-Ready Memory (Status indication at bottom of screen)

This status indicator is displayed at the bottom of the BIOS screen and consists of the following remarks:

➢Enabled: SLI-Ready memory is detected and enabled.

➢Disabled: SLI-Ready memory is detected but disabled.

➢Not Detected: SLI-Ready memory is not detected.

30