First OUT Faults ST8 Series, First Out

FIRST OUT FAULTS: ST8 Series

First out fault Tattletale tells you which monitored variable malfunctioned first. The fault is annunciated and locked in until reset by the operator. Applications include process monitoring such as compressors, pumps, generators, etc. Preprinted peel and stick nameplates for common faults are supplied with each unit.

8 First Out

ST8F (flange mount) and ST8G (gimbal mount)

•Provides 8-point first out cause of shutdown Tattletale. A flashing LED indicates the cause of shutdown identified by the nameplate.

•Accepts N.O. and/or N.C. contacts.

•Includes SPDT dry contact output rated 2 A @ 28 VDC.

•Selectable sensor lockout for delay on startup.

•Input voltage 8-32 VAC or 8-40 VDC.

GENERATORS: STA16 Series

The STA16 is a multi-functional visual and audible 16-point alarm typically applied as a remote alarm. Its picture frame bezel allows for flush mounting into a control panel or customer supplied wall mounted pull box. Preprinted peel and stick nameplates for all common engine and generator functions allow for generic applications or for NFPA-110 REQUIREMENTS,

16-Points

•STA16 is a 16-point annunciator for generator sets.

•Provides 16 points of visual and audible alarms including built-in sensing for low battery voltage and battery charger malfunction.

•Accepts N.O. switch inputs

•Negative switch input.

ST-95046B page 3 of 6