POWER SUPPLY
This unit operates with 4 X SIZE “C’ (UM2) batteries or from AC120V/60Hz line adaptor externally( not included)
A. DC POWER OPERATION
1.Open the BATTERY CASE (#25)
2.Insert 4 pcs Size “C” (UM2) batteries (not included) according to the polarity diagram on the back cabinet.
3.Close theBATTERY CASE (#25).
4.Turn the POWER ON/OFF (11#) to ON position, the POWER INDICATOR(#15) will be turned red
IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
Note: For better performance and longer operating time, we recommend the use of alkalinetype batteries.
(a)Do not mixold and new batteries.
(b)Do not mixalkaline, standard (carbonzinc) or rechargeable (nickelcadmium) batteries.
If the unit is not to be used for an extended period of time, remove the battery. Old or leaking battery can cause damage to the unit and may void the warranty.
B. AC POWER OPERATION –Optional Function
Remark:this unit doesn’t provide the AC/DC adaptor.we suggest you to buy the proper AC/DC adaptor with below character to connect the AC directly.
Input: AC 230V /50HA / Output : 6V / 600MA Dia 3.5mm DC Jack
1.Connect the DC Jack into the DC 6V MAINS (#14) on the side of the unit.
2.Connect the other terminal of the AC/DC Adaptor to the wall outlet
3.Turn the POWER ON/OFF (11#) to o”ON” position, the
POWER INDICATOR(#15) will be turned red
CD PLAYER OPERATION
1.Set the FUNCTION SELECTOR (#23) to the "CD" position.
2.Open the CD DOOR (#21). Place an audio CD with its label side upward in the CD compartment and close the CD DOOR(#21).
3.After a few seconds, the total number of tracks on the CD will appear in the CD TRACK DISPLAY (#16).
4.Press the CD PLAY/PAUSE BUTTON (#8) and the CD will start playing from the first track. The CD Track Display will light steadily.
5.Adjust the VOLUME CONTROL (#22) to obtain the desired sound level from the SPEAKER (#17).
6.To suspend playing, press the CD PLAY / PAUSE Button (#8). The CD Track Display will flash. To resume playing, press the CD PLAY / PAUSE BUTTON(#8) again.
7.You can choose to play your favorite track directly by pressing the CD F.FWD BUTTON(#7) to skip forward or CD REW BUTTON(#6) to skip backward. The CD TRACK DISPLAY (#16) will indicate the correct track number selected.
8.To repeat playing a particular track, press the REPEAT BUTTON(#3) once. The LCD display will show “ONE” ( That means it will repeat the current song)
9.To repeat playing entire CD , Press the REPEAT BUTTON(#3) twice , the LCD display will appear “ALL” (that means it will repeat the entire tracks of the disc.) ; Press the REPEAR BUTTON (#3) three times, it will stop the REPEAT function and back to normal play
10.To play randomly , Press RANDOM BUTTON(4#) once, The LCD display will show “SHUF” and play the songs randomly; Press RANDOM BUTTON(4#) again, the “SHUF” will be disappeared ,then back to the normal play.
11.To stop playing, press the CD STOP BUTTON(#5).
12.When you wish to turn off the CD Player, set the POWER ON/OFF BUTTON (#11) to the "OFF" position.
5