Software Installation
Modem will work. If you are using an ISDN TA, refer to the ISDN TA’s User Guide for information on the initialization and hang up strings. Use RouteFinder Manager to enter your modem or TA strings.
16.The Setup Wizard: Modem Setting dialog box
Use the Asynchronous port settings list to select the baudrate. Select the DTE speed (the speed of communication between the asynchronous port of the RF802EW and the modem). For DCE speed compression modems, this value can normally be set to about 4 times the speed of your modem. Keep in mind that if you set the baudrate too high, the dial- up connection may fail.
Note: You may need to set a lower baudrate since the theoretical maximum connection speed may not be attainable due to variations in quality of phone line and ISP connection.
Click Next to complete the basic configuration.
21