FRONT VIEW
(210 mm)
|
| SWI | C | HGA |
| Y | S | W | I CH | GA |
| HY |
|
|
| PH |
|
|
| ||
U | RP |
|
| G | U | R |
|
|
| GE |
|
|
| E |
|
|
|
| ® | ||
M |
|
|
| ® | M |
|
| F |
|
|
|
| P.S.I. |
|
|
|
|
|
|
|
(248 mm)
(260 mm)
Dimensions
SIDE VIEW | BOTTOM VIEW |
(117 mm)
3 in.
(76 mm)
1/4 in. (6 mm) | M10 x 1.5 |
diameter |
NOTE: Mounting brackets | ||
and shockmounts not | ||
(46 mm) | ||
shown in this view. | ||
|
CAUTION: “OIL FILLED INSTRUMENTS CONTAIN SILICON OIL” Exposure may be hazardous under certain circurmstances.
“DO NOT CUT CAPILLARY” It contains chemicals or solvents which may be hazardous under certain circurmstances.
“Keep out of Eyes, Mouth and Do Not expose to Skin”. Keep out of reach of children. Flush thoroughly with water and seek medical attention.
If swallowed, call physician immediately. MSDS Sheets ara available by calling:
CAUTION: Certain dangers to human safety and to equipment may occur if some equipment is stopped without
www.fwmurphy.com
918.317.4100 Email: sales@fwmurphy.com
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time. MURPHY, the Murphy logo, and Swichgage® are registered and/or com- mon law trademarks of Murphy Industries, Inc. This document, including textual matter and illustrations, is copy- right protected by Murphy Industries, Inc., with all rights reserved. (c) 2006 Murphy Industries, Inc.