Minicom Advanced Systems Smart IP Extender Configuring the system, Configuration via Dhcp server

Page 14

SMART IP EXTENDER

18.Configuring the system

The IP Extender's communication interfaces are based on TCP/IP, and it comes configured with the values listed below.

DHCP - active

IP address - 192.168.0.220

Net mask - 255.255.255.0

Default Gateway - None

If the above values are unsuitable, change the IP configuration. This can be done in a number of ways:

19.Configuration via DHCP server

By default, IP Extender will try to contact a DHCP server in the subnet to which it is physically connected. If a DHCP server is found it may provide a valid IP address, gateway address and net mask. Before connecting the IP Extender to your local subnet complete the corresponding configuration of your DHCP server.

We recommended configuring a fixed IP assignment to the MAC address of IP Extender. You can find the MAC address on the outside of the shipping box and also labeled on IP Extender's underside. If the DHCP connection fails on boot up, IP Extender will boot with the last known IP configuration. So for the initial use this would be the pre-configured IP address as set out above.

20.Configuration via local console

There are two ways of doing this:

(A)Connect the NULL modem cable to the computer and to IP Extender’s Serial 1 port. Use any Terminal software to connect to IP Extender. The screen shots below use Windows Hyperterminal.

1.Choose Start/Programs/Accessories/Communications/Hyperterminal.

2.When prompted enter a name and click OK. The Connect To box appears. See Figure 8.

3.Fill in the connection details. Select COM 1 in the Connect using box and click OK. The COM 1 properties box appears. See Figure 9.

13

Image 14
Contents Smart IP Extender User Guide Table of Contents User Guide Smart IP Extender Technical precautions WelcomeIntroduction IP Extender usage scenarioFeatures of IP Extender Remote power managementIP Extender front panel System componentsIP Extender cables IP Extender rear panel ports Serial 1 portSerial 2 port Pre-installation instructionsConnecting the IP Extender to the host computer/KVM switch EthernetIP Extender connections to a computer Connecting the Power management options Connecting the Ipmi optionSwitching on Connecting the External Reset/Power OptionConnecting to Ethernet Mbps ConnectionConfiguration via local console Configuring the systemConfiguration via Dhcp server Connect To box Host system mouse settings Mouse, Keyboard and Video configurationIP Extender mouse setting IP Extender Video Modes Operating the IP Extender systemLogin screen LoggingTimeout Work areaRemote Console Keyboard layoutControl buttons /toolbar icons Chat window Chat windowVideo settings Video settingsMouse synchronization limitations Video Settings accessMouse synchronization Single mouse mode Remote Console SettingsVarious Remote Console Options Remote Console TypeEvent Log via Ipmi Telnet ConsoleStatus via Ipmi Power Control External powerKeyboard & Mouse Settings Keyboard & Mouse SettingsDirect 1n mouse mode Automatic speed detectionActive Port KVM SettingsDefault configuration Number of PortsKVM Port Settings KVM Port SettingsVideo quality/speed Enable local video portNoise filter Custom Video ModesCustom Video Modes window Existing user Password / Confirm passwordUser/Group Management New user nameExisting groups Email address /Mobile numberGroup membership/Member of/Not Member New group nameCreate group button Copy UserGroup Management Delete Group buttonUser/Group Permissions Network Settings Network SettingsSubnet mask IP auto configurationIP address Gateway IP addressDynamic DNS Dynamic DNS Settings Serial line speed Modem SettingsEnable modem on RS Modem Init StringSerial Port Settings Serial PortExternal Power Option Security Settings SSL settingsSSL Certificate Management CSRTelnet Settings IP Access ControlAnti Brute Force Settings Snmp Settings You can change the following parameters Ipmi Settings IP Extender Snmp MIBLdap Settings Ldap SettingsMaintenance Updating firmwareMaintenance Features Direct SmartIP LinksIcons are color coded as follows Data file for support Include/modify custom Html codeAccess via Telnet Telnet server commandsFrequently Asked Questions Glossary of terms Appendix a IP Extender Video modes Appendix B Key codes Key RJ 45 Connector Ethernet Appendix C Pin assignmentsSerial SUB-D 9 Connector Appendix D Technical specifications User Guide Smart IP Extender

Smart IP Extender specifications

The Minicom Advanced Systems Smart IP Extender is a cutting-edge device designed to enhance remote access and management of IT infrastructure. This product offers a seamless solution for extending video and USB signals over a standard IP network, thus allowing users to operate computers and peripherals from virtually anywhere in the world.

One of the main features of the Smart IP Extender is its support for high-resolution video transmission. It is capable of delivering resolutions up to 4K, which ensures that visual quality is not compromised, even when extending displays over long distances. This feature is particularly valuable in environments where high-definition graphics are crucial, such as in video editing, graphic design, and security applications.

Another standout characteristic of the Smart IP Extender is its flexibility in connectivity. The device supports multiple USB devices, enabling users to connect keyboards, mice, and other peripherals without the need for additional hardware. This plug-and-play functionality simplifies installation and allows for quick setup, making it ideal for both small offices and large enterprises.

In terms of technology, the Smart IP Extender utilizes advanced encoding and decoding technology to ensure minimal latency during data transmission. This latency reduction is essential for applications requiring real-time interaction, such as remote desktop access and virtual collaboration. Additionally, its high data rate capacity means that users can experience smooth and responsive performance, regardless of the distance from the source.

Security is another key feature of the Minicom Smart IP Extender. The device employs robust encryption protocols to protect sensitive data being transmitted over the network. This is particularly important for organizations handling confidential information, as it helps to mitigate risks associated with data breaches.

Moreover, the Smart IP Extender is designed with scalability in mind. Organizations can easily expand their network infrastructure without the need for complex rewiring or additional equipment. By integrating seamlessly with existing IT setups, the Smart IP Extender provides a cost-effective solution for future upgrades.

In summary, the Minicom Advanced Systems Smart IP Extender is a versatile tool offering high-quality video transmission, ease of use, minimal latency, enhanced security, and scalability. It stands out as an essential component for businesses seeking efficient remote access to their IT systems.