Milan Technology MLH-H 1120, MLH-H 1130 manual Port Hub Front Panel and Rear Panel

Page 4

Figure 1. 4-Port Hub: Front Panel and Rear Panel

Figure 2. 8-Port Hub: Front Panel and Rear Panel

Caution:

Before you begin the installation, check the AC power line voltage used in your area. The AC power adapter that was included with your hub should match the power supply voltage used in your area. Using an AC power adapter with an incorrect AC voltage may damage your hub.

AC input power: equal to the AC power voltage used in your area.

DC output power: 7.5 V @ 500 mA (4-port)

7.5V @ 700 mA (8-port)

4

Image 4
Contents Installation Guide Introduction · UL/CUL, TUV Port Hub Front Panel and Rear Panel Interconnecting Hubs LED Indicators Table below lists the status and descriptions of the LEDs VDC @ 700 mA 8-port To Contact MiLAN Technology