Milan Technology MIL-S24002TGXX manual LED Indicators, Led

The 3-pronged power plug, on/off switch, and Ventilation fan are located at the rear Panel of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch as shown in Figure 2-2. The Switch will work with AC in the range 100-240V AC, 50-60Hz.

Figure 2-2. Rear panel of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch

LED Indicators

The LED Indicators gives a real-time indication of system operating statuses. There are 3 LED-indicators (1000, LNK/ACT, FDX/COL) for each Gigabit port and one Power LED for unit. The following table provides descriptions of LEDs status and their meaning.

		Figure 2-3.LED Indicators
LED	Status		Description
	Green		Power On
Power
	Off		Power is not connected

1000

Green	The port is operating at the speed of 1000Mbps.
Off	No device attached or in 10/100Mbps mode

Green

The port is connecting with the device.

LNK/ACT

Blinking

The port is receiving or transmitting data.

Off

No device attached.

FDX/COL

Orange

The port is operating in Full-duplex mode.

4