Normal disc play
1.Switch on your amplifier and set its input selector to the correct posi- tion. Adjust the volume control to a minimum.
2.Press the Power button.
3.Press the Open/Close button to open the disc tray, and load a disc.
4.Press the Open/Close button again to close the tray. The CD player will read the disc and enter Standby mode. Alternatively pressing Play/Pause will close the tray and start playing the disc.
5.Press the Play/Pause button. The disc will start playing from the beginning of the first track. When the last track has finished playing, the CD player will return to Standby mode.
OPEN / CLOSE | / | FOLDER |
6.To stop the disc at any point press the Stop button. Pressing the Play/Pause button while the disc is playing will pause the disc. When the disc is paused the display will flash, play can be resumed by pressing the Play/Pause button again.
MP3 disc play
1.Insert an MP3 disc as normal.
2.The display will show the total number of tracks and folders respec- tively when a MP3 disc is loaded.
3.Press the Folder buttons to skip forward or backward to locate a desired MP3 folder on the CD.
OPEN / CLOSE | / | FOLDER |
4.Press Play/Pause to play the CD. The display will show the track num- ber and the elapsed time of the track being played.