Milan Technology MIL-S8000G manual Hardware Description, Front Panel, LED Indicators

Page 6

2. Hardware Description

Front Panel

The Front Panel of the 8-Port Gigabit Switch consists of eight auto- negotiation 10/100/1000Mbps Ethernet RJ-45 connectors, supporting automatic MDI/MDIX, and four LED-indicators (1000M, 100M, LK/ACT, FUL/COL) for each Gigabit port.

Console Port

 

 

RJ-45 Gigabit Ports

 

 

LEDs

 

 

 

 

 

 

 

Figure 2-1. The Front Panel of the 8-Port Gigabit Switch

„RJ-45 Ports ( Auto MDI/MDIX ): Eight auto-negotiation 10/100/1000Mbps Ethernet RJ-45 connectors.

„Console Port : Console management is available through the Console Port. A direct connection between the Switch and an end station ( PC ) via a RS-232 cable is required.

LED Indicators

The LED Indicators gives a real-time indication of system operating statuses. There are four LED-indicators for each Gigabit port and one Power LED for Unit. The following table provides descriptions of LEDs

status and their meaning.

Figure 2-2.

LED Indicators.

4

Image 6
Contents MIL-S8000G Info@milan.com 90000404A Table of Contents Features IntroductionPackage Contents LED Indicators Hardware DescriptionFront Panel Rear Panel Status DescriptionRack-mounted Installation InstallationDesktop Installation Attaching Rubber FeetPower On Attach mounting brackets with screwsBackbone Switch Network ApplicationWorkgroup a Workgroup B Network Configuration Login to the Console Interface Port StatusPort Configuration Port Configuration menuMirror Configuration Device Configuration Setup menuVlan Configuration Vlan Configuration menuVlan Setup Trunk ConfigurationMiscellaneous Configuration 10. The Misc. Configuration menu„ Diagnostic LED Indicator Troubleshooting„ Power „ Transmission ModeMIL-S8000G Technical Specifications CompliancePage Part No a