Minicom Advanced Systems 5UM70156 V1.1 12 manual Serial tab elements

Page 37

KVM.NET

5.7.2.3The Serial tab elements

Click the Serial tab. The following appears.

Figure 39 The Serial tab

Here you define the console parameters for controlling Network devices over RS232, that are physically connected to the IP Access’ Serial connector.

Device Name - type the name of the device (i.e. Power Management; CISCO router; etc)

Baud Rate, Data Bits, Parity, Stop bits - type the appropriate values according to the network device specifications, attached to IP Access.

Click . The device profile appears in the list of Device Profiles.

36

Image 37

Contents KVM.net User Guide Copyright Table of Contents Accessing the system as a User Introduction Key featuresTerminology Pre-installation guidelinesSystem components Pointer tab Connecting the hardware Connecting and setting up the systemInitial Settings Obtaining an IP address via DhcpSetting the system’s date and time Changing the Root user’s passwordAccessing the KVM.net Manager from outside a Firewall Accessing the KVM.net Manager from a remote locationDisplaying the Web interface IP Access statusDefining the KVM switches Configuring the system componentsCreating Target servers Importing a new KVM SwitchNew from scratch- General tab General tab elements Mouse parametersAdvanced tab elements Deleting Targets Configuring the IP Access unitsGeneral tab elements Assigning a name to an IP Access unitTarget tab elements KVM Switches tab elementsNetwork tab Network tab elementsSerial tab Serial tab elementsAdvanced button Deleting an IP Access unit Forming users into groups Using the system an overviewGeneral tab elements Creating a userTargets tab elements All Users list User summaryDeleting a User Creating a User GroupMembers tab Members tab elementsUsers Group tab Adding Users to a GroupAssociating User/Groups with Targets When editing a User Select User Groups / All UsersDeleting Users from a Group Disassociating a User/Group from a Target When editing a Target Select Target Sets / All TargetsDeleting a User Group Deleting from the menu Expand User GroupsCreate Target Set General tab Creating a Target SetDeleting a Target Set Users tab elementsDeleting from the menu Expand Target Sets Target Sets Associating Target servers with Target Sets Creating a Target Profile Creating Profiles Advanced tab elements Right-clickDevice Profiles. New Profile appears Creating an IP Access ProfileNetwork tab elements Serial tab elements Upgrading the KVM.net/IP Access firmware Maintenance featuresBackup Schedule Backup elementsAccount policy Password policyAccount blocking Idle timeoutUpdating the system General Administration of the systemExiting the KVM.net Manager system Shutting down the KVM.net Manager system Rebooting KVM.net Manager systemActivity Log Status column Accessing the system as a UserConnecting to a Target server Accessing an IP Access unit directlyNavigating the Web display My PropertiesTechnical Specifications Appendix a Regional Offices