CONTROLS AND DISPLAYS
8.RS 232 JACK
Use this jack for connection to computer control.
9.POWER INPUT (AC IN)
Connect to AC mains using the included power supply cord.
10.SOFTWARE UPGRADE PORT
11.DIGITAL OUTPUT JACK (TOSLINK)
44.1 kHz – 192 kHz digital data output from this jack.
With SACD discs, no digital signals are delivered from Super Audio CD discs.
12.DIGITAL OUTPUT JACK (COAXIAL)
44.1 kHz - 192 kHz digital data output from this jack.
With SACD discs, no digital signals are delivered from Super Audio CD discs.
13.DIGITAL OUTPUT JACK (AES/EBU)
44.1
With SACD discs, no digital signals are delivered from Super Audio CD discs.
PIN ASSIGNMENT
The pin assignments of all of the
Pin 1: Signal ground
Pin 2: Signal +
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to the owner's manual for the other components in your audio system to verify that the XLR pin assignments of its input connectors correspond to the CD 303T SACD Professional Version. If they are different, wire the XLR cable so that the appropriate XLR output pin connects to the equivalent XLR input pin.
Pin 1: Signal ground
Pin 2: Signal +
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
11