3.3Selecting a Server Port
The users have two means to select a server port: the front panel buttons and the on- screen menu.
The front panel buttons will increment or decrement the server port number for the selected user. If a port has been selected by the other user on the ServerSwitch, then it will not appear as the user scrolls through the server ports using the front panel buttons. One user at one time may select a server port using the front panel buttons; to switch between user A and user B, press both the up arrow and down arrow buttons simultaneously, and then release. Using the front panel buttons to select a server port can be rather slow, especially when many units are cascaded, so most users will probably prefer to use the
The
Lightwave Communications Inc. Curr: 1
8200 System setup...
no Auto scan
Jump to port...
Disabled
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Port 7
Port 8
Esc exits
When the
13