Cary Audio Design SA-200.2 owner manual General Specifications

SPECIFICATIONS

Operating the SA-200.2 amplifier is a simple procedure since each unit is designed for long-term stability in virtually any home operating situation. However, if the unit is operated outside the parameters outlined in this owner’s manual, damage may occur. Please read this manual carefully before operating your new SA-200.2.

GENERAL SPECIFICATIONS

................................................................................................................................................

Circuit TypeSolid State, Class A/B

................................................................................................................................................

Power Output	2 x 200 Watts @ 8 Ohms from 20 Hz to 20 kHz
	2 x 350 Watts @ 4 Ohms from 20 Hz to 20 kHz

................................................................................................................................................

Frequency Response 10 Hz to 50 kHz +/- 0.1 dB

................................................................................................................................................

Signal-to-Noise Ratio >100 dB, “A” Weighted

................................................................................................................................................

Input Impedance	22K Ohms – Unbalanced ( RCA jacks)
	22K Ohms - Balanced (XLR)

................................................................................................................................................

Voltage Gain 28 dB

................................................................................................................................................

AC Power117/234 Volts AC @50-60 Hz

................................................................................................................................................

Break-in Time100 Hours of playing time

................................................................................................................................................

Finish	Black epoxy coated steel chassis.
	Silver anodized aluminum faceplate. (Black Optional)

................................................................................................................................................

Weight65 lbs

................................................................................................................................................

Dimensions7.5” H x 17.7” W x 19.5” D

................................................................................................................................................

Audio Input2 RCA jacks, 2 XLR jacks

................................................................................................................................................

Audio Output2 pair Heavy-Duty, gold-plated binding posts

................................................................................................................................................

THDLess than 0.05% at rated output

................................................................................................................................................

Damping FactorGreater than 400 from 10Hz to 20 kHz

................................................................................................................................................

Remote Trigger 3.3-24v DC at 5mA or greater

7